• 4A0-106题库demo免费下载

  Filed under Alcatel Lucent
  Aug 3

  Alcatel Lucent认证4A0-106考试题库介绍

  考试代号: 4A0-106
  问题数量:61 Q&As
  
  更新时间: 2009-09-12
  注册地点: Prometric/Pearson VUE
  题库全称:Alcatel-Lucent Virtual Private Routed Networks

  免费4A0-106题库Demo赏析

  　
  　
  Exam : Alcatel Lucent 4A0-106
  Title : Alcatel-Lucent Virtual Private Routed Networks

  1. Which of the following statements are true regarding P devices in an MPLS VPRN? (Choose two.)
  A. Participate in service provider core routing
  B. P devices are not required to be MPLS enabled. MPLS is only required on the PE devices
  C. Run a common routing protocol with the CE router
  D. Must support MP-BGP
  E. Do not have any connections to the CE
  F. Must be aware of the VPRNs
  Answer: AE

  2. What are the main functions of a Layer 3 VPN? (Choose three).
  A. Distributing customer routing information between sites
  B. Forwarding customer data packets
  C. Providing an integrated billing solution
  D. Maintaining separation between distinct customer networks
  E. Allowing the implementation of Layer 3 devices in the provider core
  Answer: ABD

  3. Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to ____________________.
  A. Identify the egress PE in the MPLS domain
  B. Signal the egress VPRN ID
  C. Identify the ingress PE in the MPLS domain
  D. transport route updates between PEs
  Answer: A

  4. Choose the answer that best completes the following sentence. The CE device is typically configured with ___________________________.
  A. A single routing protocol for exchanging routes with both the internal customer routers and with the PE
  B. MP-BGP to exchange routes with the PE.
  C. MPLS and a routing protocol for the exchange of labels and routes with the PE
  D. MPLS for exchanging labels with other CE devices
  E. A routing protocol for exchanging routes with the internal customer routers and a routing protocol for exchanging routes with the PE
  Answer: E

  5. Which of the following devices would typically have VRF instances?
  A. Any CE device
  B. Any PE device
  C. Any P device
  D. Any router in the service provider core
  E. Any customer router
  Answer: B

  6. In a VPRN the PE device is configured to run which of the following protocols? (Choose three.)
  A. MP-BGP for exchanging customer routes with other PEs
  B. A routing protocol for exchanging customer routes with the CE
  C. MPLS for exchanging labels with other provider core devices
  D. MPLS for exchanging labels with the CE devices
  E. Targeted LDP for exchanging VPRN labels with other PE devices
  F. A label signaling protocol for defining transport tunnels between PE and CE devices
  Answer: ABC

  7. In a traditional layer 3 VPN which of the following will be an issue when there is overlapping address space between two customers? Choose the best answer.
  A. There will be increased memory usage on the PE
  B. There will be increased CPU utilization on the PE
  C. The CE will reject the overlapping prefix
  D. The PE will not recognize the prefixes as being different
  E. There is no issue with overlapping address space in a traditional Layer 3 VPN
  Answer: D

  8. Which of the following statements is true? Choose the best answer.
  A. A P router may forward customer packets to their destination without the presence of a route to that destination
  B. The ingress PE router may forward customer packets to their destination without the presence of a route to that destination
  C. The egress PE router may forward customer packets to their destination without the presence of a route to that destination
  D. Any provider core router (P or PE) may forward customer packets to their destination without the presence of a route to that destination
  Answer: A

  9. What operation is performed by a P device on the label signaled by MP-BGP when it receives a labeled packet for a VPRN service?
  A. It will label switch the packet based on this label
  B. It will decrement the TTL and label switch the packet based on this label
  C. It will SWAP the label for a new label and then label switch the packet
  D. The P router does not perform any operation on this label
  Answer: D

  10. Which of the following terms also correctly describes a Layer 3 VPN? (Choose three)
  A. VPRN
  B. BGP/MPLS VPN
  C. VLL
  D. VPLS
  E. IP-VPN
  F. ePipe
  Answer: ABE

  11. When a Service Provider offers VPRN services to its customers, which of the following functions are expected to be the responsibility of the Service Provider? (Choose three)
  A. Distributing the customer generated labels between sites
  B. Distributing the customer routing information between sitesDistributing the customer? routing information between sites
  C. Forwarding the customer originated data packets to the appropriate destination
  D. Forwarding the provider originated data packets to the appropriate customer site
  E. Providing secure layer 3 routing exchange between sites
  Answer: BCE

  12. What are the two primary problems the service provider must consider when providing traditional Layer 3 VPN services using only a single common routing table in the provider core? (Choose two)
  A. Memory exhaustion in the provider core
  B. Route leaking between the customer networks
  C. CPU utilization for route processing
  D. Unwanted packet forwarding between customer networks
  Answer: BD

  13. Which protocol is used to exchange customer VPRN routes between PE devices?
  A. OSPF
  B. ISIS
  C. MP-BGP
  D. BGP
  E. Targeted LDP
  Answer: C

  14. Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to ____________________.
  A. Identify the egress PE in the MPLS domain
  B. Signal the egress VPRN ID
  C. Identify the ingress PE in the MPLS domain
  D. transport route updates between PEs
  Answer: A

  15. Complete the following statement. In a VPRN, the inner label is used to ____________________.
  A. Identify the customer network on the egress PE
  B. Establish the LSPs between PE devices
  C. Identify the egress PE in the MPLS domain
  D. Identify the customer network on the ingress PE
  Answer: A

  免费下载4A0-106题库Demo

  Examsoon提供最新的Alcatel Lucent认证 4A0-106题库，其全名为：(Alcatel-Lucent Virtual Private Routed Networks). 在您决定是否购买之前 可以先下载4A0-106题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费4A0-106模拟测试题的下载链接

  免费的4A0-106题库PDF下载链接

  Alcatel Lucent 4A0-106学习指南

  Alcatel Lucent认证 4A0-106考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。Alcatel Lucent认证 4A0-106学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试4A0-106考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。Alcatel Lucent认证 4A0-106是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

  想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的4A0-106考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他4A0-106考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

  Examsoon考题大师4A0-106试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加4A0-106考试，保证您一次轻松通过考试；

  售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；
  
  

  No Comments

Leave a Reply

You must be logged in to post a comment.