• PW0-205题库demo免费下载

  Filed under CWNP
  Aug 3

  CWNP认证PW0-205考试题库介绍

  考试代号: PW0-205
  问题数量:120 Q&As
  
  更新时间: 2009-09-25
  注册地点: Prometric/Pearson VUE
  题库全称:certified wireless analusis professional(cwap)

  免费PW0-205题库Demo赏析

  　
  　
  Exam : CENP PW0-205
  Title : certified wireless analusis professional(cwap)

  1. In which of the following IEEE 802.11a frames can the SSID be found providing the SSID is not specifically removed through firmware configuration by an administrator?
  A. Association Request
  B. Reassociation Request
  C. Probe Response
  D. Disassociation
  E. Authentication
  F. Reassociation Response
  Answer: ABC

  2. The Timestamp field, found in 8011 Beacon Management frames, is 8 bytes in length and serves which of the following purposes?
  A. Keeps all client stations in a BSS synchronized to within approximately 4 microseconds of the access point.
  B. Allows client stations in the IBSS to pick the best of multiple beacons.
  C. Used to notify client stations using power management features of how long their queued frames have been held by the access point.
  D. Informs associating client stations how often to expect Beacon Management frames to be sent by the access point.
  E. Allows all client stations in a BSS to calculate how long it took for the Beacon Management frame to traverse the wireless medium.
  Answer: AB

  3. Which of the following descriptions accurately describes IEEE 802.11 compliant Power Save mode operation in a DCF Basic Service Set?
  A. Following a period of time in a low power state, client stations wake themselves and automatically poll the access point for traffic using a PS-Poll frame.
  B. When the access point’s buffer is full, the access point wakes all client stations using a PS-Poll frame so that they can receive the data.
  C. Upon receiving traffic for a dozing station, the access point wakes the client station using a PS-Poll frame so that the client station can receive the data.
  D. After waking from a low power state, client stations listen for the next beacon to determine if sending a PS-Poll frame to the access point is necessary.
  E. After waking at a schedule TBTT, client stations automatically send Null Function frames to the access point with the Power Management bit cleared.
  Answer: D

  4. The 802.11 series of standards calls for use of a Traffic Indication Map (TIM) and a Delivery Traffic Indication Message (DTIM). Which of the following is true regarding the TIM and DTIM in an infrastructure BSS?
  A. The TIM is a field in the Beacon Management frame that holds a map of every client station associated to an access point. It is used for broadcast traffic delivery.
  B. The TIM and DTIM are both part of the Beacon management frame and are both sent in every Beacon for the purpose of announcing the modulation type and supported rate set of the access point.
  C. The DTIM parameters are part of each Beacon’s TIM Information Element, and they are used to indicate queued broadcast/multicast data to client stations using power management features in the BSS.
  D. The DTIM is used in 802.11a and 802.11g Beacons whereas the TIM is used only in 802.11b Beacons. The DTIM purpose is to allow for higher rates of Beacon broadcasting and thus raise overall data rates in OFDM based systems.
  E. A DTIM period of 0 means that every TIM is a DTIM.
  F. The first Beacon sent during a CFP must contain a DTIM
  Answer: CF

  5. Choose the true statements regarding wireless network discovery processes for an 802.11b network.
  A. Client stations may continually send Probe Request frames on all 802.11b channels in the 2.4 GHz ISM band in a consecutive manner, regardless of their association state.
  B. Access points send Beacon Management frames on all 802.11b channels in the 2.4 GHz ISM band in a consecutive manner including the channel for which the access point is configured.
  C. Client stations send Probe Request frames on all 802.11b channels in the 2.4 GHz ISM band in a consecutive manner until they associate with an access point. After associating to an access point, they are no longer allowed to transmit Probe Request frames.
  D. Access points send Beacon Management frames only on the 802.11b channel in the 2.4 GHz ISM band for which the access point is configured.
  E. Client stations send Probe Request frames on all 802.11b channels in the 2.4 GHz ISM band in a consecutive manner until they receive at least 3 Probe Response frames.
  Answer: AD

  6. The 802.11 standard allows for frame fragmentation due to an unreliable medium. Which two fields in the 802.11 frame are involved in numbering data frame fragments and notifying the receiving station when all of the fragments of a data frame have been received?
  A. Capability Information field
  B. Frame Control field
  C. ERP Information field
  D. Sequence Control field
  E. DS Parameter field
  F. Ordered Service field
  Answer: BD

  7. An 802.11 data frame has multiple address fields. How many address fields are there and how are they used?
  A. Two address fields, used for SA, DA
  B. Three address fields, used for SA/TA, DA/RA, BSSID
  C. Four address fields, used for SA, DA, BSSID/TA, RA
  D. Five address fields, used for SA, DA, TA, RA, BSSID/HA
  E. Six address fields, used for SA, DA, TA, RA, BSSID, HA
  Answer: C

  8. When using a wireless protocol analyzer, it is common to see Beacon Management frames (Beacons) being sent several times per second. Which of the following statements is true regarding Beacons?
  A. Beacons can be disabled for security purposes.
  B. The BSSID and Source Address are always the same.
  C. The Destination address is always FF:FF:FF:FF:FF:FF.
  D. The Receiver address and the BSSID are always the same.
  E. The reason Beacons are transmitted so often is that they are unicast frames destined to each associated station.
  F. The 802.11 standard specifies that all Beacons must contain a DTIM information element.
  Answer: BC

  9. When an access point sends an RTS frame, the duration field will contain an amount of time, measured in microseconds, equal to which of the following?
  A. 2 ACK, 1 RTS, 1 DATA, 4 SIFS
  B. 1 ACK, 1 CTS, 1 DATA, 3 SIFS
  C. 1 DATA, 1 RTS, 2 SIFS, 1 DIFS, 1 ACK
  D. 1 RTS, 1 CTS, 1 DATA, 2 ACK, 4 SIFS
  Answer: B

  10. In a DCF 802.11g network, when is the Power Management subfield of the Frame Control field set to a value of 1?
  A. Only in management frames sent by a client station immediately prior to entering a low power state (dozing) that are part of a frame exchange sequence.
  B. On any Data frame sent by the access point subsequent to a PS-Poll frame.
  C. On any frame transmitted by a client station operating in Power Save mode.
  D. Only in the PS-Poll frame sent from a client station operating in Power Save mode to an access point after the client station awakens from a low power state (dozing).
  Answer: C

  11. A wireless network administrator has examined the frame retry counts on several client stations in a WLAN that is not using encryption, and has determined that they are extraordinarily high. For this reason, he has decided to configure station fragmentation thresholds to 400 bytes. With this configuration change, when a data frame with a 1500 byte MSDU is transmitted by one of the wireless client stations to a wired station through an access point, what will be the order and size (in bytes) of the fragments as they’re transmitted?
  A. Frame1 = 400, Frame2 = 400, Frame3 = 400, Frame4 = 300
  B. Frame1 = 300, Frame2 = 300, Frame3 = 300, Frame4 = 300, Frame5 = 300
  C. Frame1 = 300, Frame2 = 400, Frame3 = 400, Frame4 = 400
  D. Frame1 = 400, Frame2 = 400, Frame3 = 400, Frame4 = 400, Frame5 = 40
  E. The fragmentation threshold setting on client stations only affects received frames, not transmitted frames
  F. The fragmentation threshold setting on client stations is not a manual adjustment, and can only be auto-configured by access points
  Answer: D

  12. How does an access point operating in DCF mode notify a client station operating in Power Save mode of multiple multicast frames queued at the access point?
  A. The access point sets the Beacon DTIM to indicate that it has queued multicast traffic for the client station.
  B. The access point sends the client station a CF-Poll frame with the AID subfield set to the station MAC address.
  C. The access point responds to the client station PS-Poll frame with the AID subfield set to a value equal to the number of queued multicast frames.
  D. The access point sets the More Data subfield in the Frame Control field of each Data frame to 1 until the last multicast frame is delivered.
  E. The access point sets the Duration field of each Beacon to a value equal to the amount of time it will take to send all of the queued multicast frames to the client station.
  Answer: AD

  13. ABC Company has recently installed its first access point. The access point is an 802.11g unit, and both 802.11g and 802.11b client stations will be used on the wireless network simultaneously. The network administrator has appropriately configured the access point and all of the company 802.11b wireless client stations to use short preambles for CCK transmissions. A visitor begins using a Personal Data Assistant (PDA) with integrated 802.11b configured for use of long preambles on ABC wireless network. Which of the following describes what the network administrator will see with a wireless protocol analyzer?
  A. Once the visitor PDA is associated to the access point, all 802.11b stations associated to the access point will begin using long preambles.
  B. The visitor PDA will not be able to associate to the wireless network, and it will cause significant interference for other wireless stations.
  C. The visitor PDA will communicate with the access point using long preambles, and the access point will communicate with all other client stations using short preambles.
  D. The visitor PDA associates to the access point using MMPDUs with long preambles, then begins sending Data frames using short preambles.
  E. Only after the visitor’s PDA associates to the access point, will the 802.11g client stations begin using protection mechanisms.
  Answer: A

  14. Referring to the diagram, match label boxes A and B with their appropriate name.
  A. A = Contention-Free Period, B = Contention Period
  B. A = ATIM Window, B = Data Window
  C. A = Congestion Control Period, B = Arbitration Window
  D. A = Frame Control Period, B = Backoff Window
  E. A = Data Period, B = Interframe Space Period
  Answer: A

  15. Which is true of the Association Identifier (AID) used in 802.11 wireless LANs?
  A. The AID has a maximum value of 2048, and is used to uniquely identify a wireless client station associated with an access point.
  B. The AID has a maximum value of 2007, and resides in the duration/ID field of a PS-Poll frame only.
  C. When bit 16 of the field is zero, the value in bits 15-0 represent the remaining duration of a frame exchange.
  D. The least significant 8 bits of this field are used by the wireless client station to identify which bit in a TIM indicates that the access point has frames buffered for the wireless client station.
  E. The AID is used by the access point in DCF mode to reduce duplicate transmissions when sending multicasts.
  Answer: B

  16. Which of the following is true regarding frame acknowledgement in an 802.11 wireless LAN?
  A. ACK frames following Data fragments set the NAV of competing stations for a duration equal to two SIFS plus the next Data fragment and its ACK.
  B. A client station reassociation request frames are only acknowledged with a reassociation response from the access point when roaming in a wireless LAN secured with 802.1X/EAP.
  C. Probe request acknowledgement (sending of a probe response) is configurable in the access point and is always linked to SSID broadcast configuration in Beacons.
  D. Beacon frames are acknowledged by all client stations configured for PCF mode.
  E. Frame fragments are acknowledged individually (with an ACK frame)
  F. In PCF mode, WEP-Data frames are only acknowledged by client stations, never by access points.
  Answer: AE

  17. An 802.11b client station, sends a single 600 byte MSDU to another 802.11b client station while operating as part of an unsecured infrastructure BSS. Due to thresholds set on all client stations and the access point, all MPDUs over 300 bytes in length invoke the RTS/CTS protocol. How many individual CTS frames are transmitted on the wireless medium as part of the entire process of moving the 600 byte MSDU between the two client stations?
  A. 1
  B. 2
  C. 3
  D. 4
  Answer: B

  18. An 802.11e compliant Data frame, also called an MPDU, may have a maximum header size of how many octets?
  A. 28
  B. 30
  C. 34
  D. 36
  E. 40
  Answer: C

  19. When the ToDS bit is set to 1 and the FromDS bit is set to 0 in the Frame Control field of an 802.11 Data frame, what might this indicate about the infrastructure and the wireless conversation?
  A. A wireless client station could be sending data to a wired station through an access point.
  B. A wireless client station must be sending data to a wireless station where the frame has to traverse a Wireless Distribution System (WDS).
  C. A wireless client station must be sending data directly to the access point for the purpose of managing the access point.
  D. A wireless client station could be sending data to a wireless client station across an access point.
  E. A wireless client station could be sending data directly to another wireless client station as part of an IBSS.
  Answer: AD

  20. When RTS/CTS is used in DCF mode, what is the frame exchange sequence between two wireless stations including interframe spaces?
  A. DIFS-RTS-SIFS-CTS-SIFS-DATA-SIFS-ACK
  B. DIFS-RTS-ACK-CTS-ACK-DATA-SIFS-ACK
  C. DIFS-RTS-CTS-SIFS-ACK-DATA-SIFS-ACK
  D. EIFS-RTS-CTS-SIFS-DATA-SIFS-ACK
  E. PIFS-RTS-SIFS-CTS-SIFS-DATA-SIFS-ACK
  Answer: A

  免费下载PW0-205题库Demo

  Examsoon提供最新的CWNP认证 PW0-205题库，其全名为：(certified wireless analusis professional(cwap)). 在您决定是否购买之前 可以先下载PW0-205题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费PW0-205模拟测试题的下载链接

  免费的PW0-205题库PDF下载链接

  CWNP PW0-205学习指南

  CWNP认证 PW0-205考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CWNP认证 PW0-205学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试PW0-205考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CWNP认证 PW0-205是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

  想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的PW0-205考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他PW0-205考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

  Examsoon考题大师PW0-205试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加PW0-205考试，保证您一次轻松通过考试；

  售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；
  
  

  No Comments

Leave a Reply

You must be logged in to post a comment.