最新的思科 微软 IBM Oracle HP 题库免费共享

免费156-215.65题库Demo赏析

　
　
Exam : Check Point 156-215.65
Title : Check Point Security Administration I NGX

1. The customer has a small Check Point installation which includes one Linux Enterprise 3.0 server working as SmartConsole and a second server running Windows 2003 working as both SmartCenter server and the Security Gateway. This is an example of:
A. Hybrid Installation
B. Stand-Alone Installation
C. Distributed Installation
D. Unsupported configuration
Answer: D

2. A marketing firm’s networking team is trying to troubleshoot user complaints regarding access to audio-streaming material from the Internet. The networking team asks you to check the object and rule configuration settings for the perimeter Security Gateway. Which SmartConsole application should you use to check these objects and rules?
A. SmartDashboard
B. SmartView Monitor
C. SmartView Status
D. SmartView Tracker
Answer: A

3. Which of the following are available SmartConsole clients which can be installed from the R65 NGX Windows CD? Read all answers and select the most complete and valid list.
A. SmartView Tracker, CPINFO, SmartUpdate
B. Security Policy Editor, Log Viewer, Real Time Monitor GUI
C. SmartView Tracker, SmartDashboard, CPINFO, SmartUpdate, SmartView Status
D. SmartView Tracker, SmartDashboard, SmartLSM, SmartView Monitor
Answer: D

4. Which of the following statements about Bridge mode are TRUE?
A. Assuming a new installation, bridge mode requires changing the existing IP routing of the network.
B. All ClusterXL modes are supported.
C. When managing a Security Gateway in Bridge mode, it is possible to use a bridge interface for Network Address Translation.
D. A bridge must be configured with a pair of interfaces.
Answer: D

5. You are installing a SmartCenter server. Your security plan calls for three administrators for this particular server. How many can you create during installation?
A. As many as you want
B. Depends on the license installed on the SmartCenter Server
C. Only one with full access and one with read-only access
D. Only one
Answer: D

6. When launching SmartDashboard, what information is required to log into VPN-1 NGX R65?
A. User Name, SmartCenter Server IP, certificate fingerprint file
B. Password, SmartCenter Server IP
C. User Name, Password, SmartCenter Server IP
D. Password, SmartCenter Server IP, LDAP Server
Answer: C

7. Your bank’s distributed VPN-1 NGX R65 installation has Security Gateways up for renewal. Which SmartConsole application will tell you which Security Gateways have licenses that will expire within the next 30 days?
A. SmartUpdate
B. SmartPortal
C. SmartDashboard
D. SmartView Tracker
Answer: A

8. When troubleshooting the behavior of Check Point Stateful Inspection, it is important to consider "inbound" vs "outbound" packet inspection from the point of view of the __________.
A. Logical Topology
B. Administrator
C. Security Gateway
D. Internet
Answer: C

9. The customer has a small Check Point installation which includes one Window XP workstation working as SmartConsole , one Solaris server working as SmartCenter, and a third server running SecurePlatform working as Security Gateway. This is an example of:
A. Distributed Installation
B. Hybrid Installation
C. Unsupported configuration
D. Stand-Alone Installation
Answer: A

10. Which SmartConsole component can Administrators use to track remote administrative activities?
A. The WebUI
B. SmartView Monitor
C. Eventia Reporter
D. SmartView Tracker
Answer: D

11. Which statement below is TRUE about management plug-ins?
A. The plug-in is a package installed on the Security Gateway.
B. Using a plug-in offers full central management only if special licensing is applied to specific features of the plug-in.
C. A management plug-in interacts with a SmartCenter Server to provide new features and support for new products.
D. Installing a management plug-in is just like an upgrade process. (It overwrites existing components.)
Answer: C

12. Which R65 SmartConsole tool would you use to verify the current installed Security Policy name on a Security Gateway?
A. SmartView Status
B. SmartUpdate
C. SmartView Monitor
D. None, SmartConsole applications only communicate with the SmartCenter Server.
Answer: C

13. It is required to completely reboot the OS after which of the following changes are made on the Security Gateway?
i.e. cprestart command is not sufficient
1. Adding a hot-swappable NIC to the OS for the first time.
2. Uninstalling the VPN-1 Power/UTM package.
3. Installing the VPN-1 Power/UTM package.
4. Re-establishing SIC to the SmartCenter Server.
5. Doubling the maximum number of connections accepted by the Security Gateway
A. 1, 2, 3 only
B. 3 only
C. 3, 4, and 5 only
D. 1, 2, 3, 4, and 5
Answer: A

14. The customer has a small Check Point installation which includes one Window 2003 server working as SmartConsole and a second server running SPLAT working as both SmartCenter server and the Security Gateway. This is an example of:
A. Distributed Installation
B. Unsupported configuration
C. Stand-Alone Installation
D. Hybrid Installation
Answer: C

15. You manage a global network extending from your base in Chicago to Tokyo, Calcutta and Dallas. Management wants a report detailing the current software level of each Enterprise class Security Gateway. You plan to take the opportunity to create a proposal outline, listing the most cost-effective way to upgrade your Gateways. Which two SmartConsole applications will you use to create this report and outline?
A. SmartView Monitor and SmartUpdate
B. SmartLSM and SmartUpdate
C. SmartView Tracker and SmartView Monitor
D. SmartDashboard and SmartView Tracker
Answer: A

16. MegaCorp’s security infrastructure separates Security Gateways geographically. You must request a central license for one remote Security Gateway. You must request a central license:
A. Using your SmartCenter Server’s IP address, attach the license to the remote Gateway via SmartUpdate.
B. Using the remote Gateway’s IP address, attach the license to the remote Gateway via SmartUpdate.
C. Using each of the Gateways’ IP addresses, apply the licenses on the SmartCenter Server with the cprlic put command.
D. Using the remote Gateway’s IP address, apply the license locally with the cplic put command.
Answer: A

17. Some control operations and user interactions are difficult or impossible to execute at the kernel level. The _________ component provides a mechanism for such operations.
A. encryption
B. daemon
C. management
D. security
Answer: B

18. What does it indicate when a Check Point product name includes the word "SMART"?
A. Stateful Management of all Routed Traffic
B. Security Management Architecture
C. The Check Point product includes Artificial Intelligence
D. This Check Point product is a GUI Client
Answer: B

19. In a "Stand-Alone Installation" the functionality of the SmartCenter Server would be installed together with which other Check Point architecture component?
A. SecureClient
B. SmartConsole
C. Security Gateway
D. None, SmartCenter Server would be installed by itself
Answer: C

20. Of the three mechanisms Check Point uses for controlling traffic, which enables firewalls to incorporate layer 4 awareness in packet inspection?
A. Stateful Inspection
B. SmartDefense
C. Application Intelligence
D. Packet filtering
Answer: A

免费下载156-215.65题库Demo

Examsoon提供最新的CheckPoint认证 156-215.65题库，其全名为：(Check Point Security Administration I NGX). 在您决定是否购买之前 可以先下载156-215.65题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-215.65模拟测试题的下载链接

免费的156-215.65题库PDF下载链接

CheckPoint 156-215.65学习指南

CheckPoint认证 156-215.65考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-215.65学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-215.65考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-215.65是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-215.65考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-215.65考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-215.65试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-215.65考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-315.65题库Demo赏析

　
　
Exam : CheckPoint 156-315.65
Title : Check Point Certified Expert NGX R65

1. Why should the upgrade_export configuration file (.tgz) be deleted after you complete the import process?
A. It will prevent a future successful upgrade_export since the .tgz file cannot be overwritten.
B. It will conflict with any future upgrades run from SmartUpdate.
C. SmartUpdate will start a new installation process if the machine is rebooted.
D. It contains your security configuration, which could be exploited.
Answer: D

2. Concerning these products: SecurePlatform, VPN-1 Pro Gateway, UserAuthority Server, Nokia OS, UTM-1, Eventia Reporter, and Performance Pack, which statement is TRUE?
A. All but the Nokia OS can be upgraded to VPN-1 NGX R65 with SmartUpdate.
B. All but Performance Pack can be upgraded to VPN-1 NGX R65 with SmartUpdate.
C. All can be upgraded to VPN-1 NGX R65 with SmartUpdate.
D. All but the UTM-1 can be upgraded to VPN-1 NGX R65 with SmartUpdate.
Answer: C

3. Identify the correct step performed by SmartUpdate to upgrade a remote Security Gateway.
A. After selecting "Packages: Add… from CD", the entire contents of the CD are copied to the packages directory on the selected remote Security Gateway.
B. After selecting "Packages: Add… from CD", the entire contents of the CD are copied to the Package Repository on the SmartCenter Server.
C. After selecting "Packages: Add… from CD", the selected package is copied to the packages directory on the selected remote Security Gateway.
D. After selecting "Packages: Add… from CD", the selected package is copied to the Package Repository on the SmartCenter Server.
Answer: D

4. Which of the following is a TRUE statement concerning contract verification?
A. Your contract file is stored on the User Center and fetched by the Gateway as needed.
B. Your contract file is stored on the SmartConsole and downloaded to the SmartCenter Server.
C. Your contract file is stored on the SmartConsole and downloaded to the Gateway.
D. Your contract file is stored on the SmartCenter Server and downloaded to the Security Gateway.
Answer: D

5. Identify the correct step performed by SmartUpdate to upgrade a remote Security Gateway.
A. After selecting "Packages > Distribute…" and choosing the target gateway, the selected package is copied from the Package Repository on the SmartCenter to the Security Gateway but the installation IS NOT performed.
B. After selecting "Packages > Distribute…" and choosing the target gateway, the SmartUpdate wizard walks the Administrator through a Distributed Installation.
C. After selecting "Packages > Distribute…" and choosing the target gateway, the selected package is copied from the Package Repository on the SmartCenter to the Security Gateway and the installation IS performed.
D. After selecting "Packages > Distribute…" and choosing the target gateway, the selected package is copied from the CDROM of the SmartUpdate PC directly to the Security Gateway and the installation IS performed.
Answer: A

6. Which of these components does NOT require a VPN-1 NGX R65 license?
A. SmartConsole
B. Check Point Gateway
C. SmartCenter Server
D. SmartUpdate upgrading/patching
Answer: A

7. You plan to migrate an NG with Application Intelligence (AI) R55 SmartCenter Server on Windows to VPN-1 NGX R65. You also plan to upgrade four VPN-1 Pro Gateways at remote offices, and one local VPN-1 Pro Gateway at your company’s headquarters. The SmartCenter Server configuration must be migrated. What is the correct procedure to migrate the configuration?
A. 1. From the VPN-1 NGX R65 CD on the SmartCenter Server, select "Upgrade".
2. Reboot after installation and upgrade all licenses via SmartUpdate.
3. Reinstall all gateways using NGX R65 and install a policy.
B. 1. From the VPN-1 NGX R65 CD in the SmartCenter Server, select "Export".
2. Install VPN-1 NGX R65 on a new PC using the option "Installation using imported configuration"
3. Reboot after installation and upgrade all licenses via SmartUpdate.
4. Upgrade software on all five remote Gateways via SmartUpdate.
C. 1. Copy the $FWDIRconf directory from the SmartCenter Server.
2. Save directory contents to another file server.
3. Uninstall the SmartCenter Server, and install a new SmartCenter Server.
4. Move the saved directory contents to $FWDIRconf replacing the default installation files.
5. Reinstall all gateways using VPN-1 NGX R65 and install a Security Policy.
D. 1. Upgrade the five remote Gateways via SmartUpdate.
2. Upgrade the SmartCenter Server, using the NGX R65 CD.
Answer: B

8. What tools CANNOT be launched from SmartUpdate NGX R65?
A. cpinfo
B. SecurePlatform Web UI
C. Nokia Voyager
D. snapshot
Answer: D

9. What action can be run from SmartUpdate NGX R65?
A. remote_uninstall_verifier
B. upgrade_export
C. mds_backup
D. cpinfo
Answer: D

10. You are running the license_upgrade tool on your SecurePlatform Gateway. Which of the following can you NOT do with the upgrade tool?
A. Simulate the license-upgrade process.
B. View the licenses in the SmartUpdate License Repository.
C. Perform the actual license-upgrade process.
D. View the status of currently installed licenses.
Answer: B

11. Your current VPN-1 NG with Application Intelligence (AI) R55 stand-alone VPN-1 Pro Gateway and SmartCenter Server runs on SecurePlatform. You plan to implement VPN-1 NGX R65 in a distributed environment, where the new machine will be the SmartCenter Server, and the existing machine will be the VPN-1 Pro Gateway only. You need to migrate the NG with AI R55 SmartCenter Server configuration, including licensing.
How do you handle licensing for this NGX R65 upgrade?
A. Request an NGX R65 SmartCenter Server license, using the new server’s IP address. Request a new central NGX R65 VPN-1 Gateway license also licensed to the new SmartCenter Server’s IP address.
B. Leave the current license on the gateway to be upgraded during the software upgrade. Purchase a new license for the VPN-1 NGX R65 SmartCenter Server.
C. Request an NGX R65 SmartCenter Server license, using the existing gateway machine’s IP address. Request a new local license for the NGX R65 VPN-1 Gateway using the new server’s IP address.
D. Request an NGX R65 SmartCenter Server license, using the new server’s IP address. Request a new central NGX R65 VPN-1 Gateway license for the existing gateway server’s IP address.
Answer: A

12. You are using SmartUpdate to fetch data and perform a remote upgrade of an NGX Security Gateway. Which of the following statements is FALSE?
A. If SmartDashboard is open during package upload and upgrade, the upgrade will fail.
B. A remote installation can be performed without the SVN Foundation package installed on a remote NG with Application Intelligence Security Gateway
C. SmartUpdate can query the SmartCenter Server and VPN-1 Gateway for product information
D. SmartUpdate can query license information running locally on the VPN-1 Gateway
Answer: B

13. Choose all correct statements. SmartUpdate, located on a VPN-1 NGX SmartCenter Server, allows you to:
(1) Remotely perform a first time installation of VPN-1 NGX on a new machine
(2) Determine OS patch levels on remote machines
(3) Update installed Check Point and any OPSEC certified software remotely
(4) Update installed Check Point software remotely
(5) Track installed versions of Check Point and OPSEC products
(6) Centrally manage licenses
A. 4, 5, & 6
B. 2, 4, 5, & 6
C. 1 & 4
D. 1, 3, 4, & 6
Answer: B

14. What port is used for communication to the UserCenter with SmartUpdate?
A. HTTP
B. HTTPS
C. TCP 8080
D. CPMI
Answer: B

15. What action CANNOT be run from SmartUpdate NGX R65?
A. Get all Gateway Data
B. Reboot gateway
C. Preinstall verifier…
D. Fetch sync status
Answer: D

16. You are a Security Administrator preparing to deploy a new HFA (Hotfix Accumulator) to ten Security Gateways at five geographically separated locations. What is the BEST method to implement this HFA?
A. Send a Certified Security Engineer to each site to perform the update
B. Use SmartUpdate to install the packages to each of the Security Gateways remotely
C. Use a SSH connection to SCP the HFA to each Security Gateway. Once copied locally, initiate a remote installation command and monitor the installation progress with SmartView Monitor.
D. Send a CDROM with the HFA to each location and have local personnel install it
Answer: B

17. You want to upgrade an NG with Application Intelligence R55 Security Gateway running on SecurePlatform to VPN-1 NGX R65 via SmartUpdate. Which package(s) is(are) needed in the Repository prior to upgrade?
A. SecurePlatform NGX R65 package
B. VPN-1 Power/UTM NGX R65 package
C. SecurePlatform and VPN-1 Power/UTM NGX R65 packages
D. SVN Foundation and VPN-1 Power/UTM packages
Answer: A

18. If a SmartUpdate upgrade or distribution operation fails on SecurePlatfom, how is the system recovered?
A. SecurePlatform will reboot and automatically revert to the last snapshot version prior to upgrade.
B. The Administrator must remove the rpm packages manually, and reattempt the upgrade.
C. The Administrator can only revert to a previously created snapshot (if there is one) with the command cprinstall snapshot <object name> <filename>.
D. The Administrator must reinstall the last version via the command cprinstall revert <object name> <file name>.
Answer: A

19. When upgrading to NGX R65, which Check Point products do not require a license upgrade to be current?
A. VPN-1 NGX (R64) and later
B. VPN-1 NGX (R60) and later
C. VPN-1 NG with Application Intelligence (R54) and later
D. None, all versions require a license upgrade
Answer: B

20. What physical machine must have access to the UserCenter public IP when checking for new packages with SmartUpdate?
A. VPN-1 Security Gateway getting the new upgrade package
B. SmartUpdate installed SmartCenter Server PC
C. SmartUpdate Repository SQL database Server
D. SmartUpdate GUI PC
Answer: D

免费下载156-315.65题库Demo

Examsoon提供最新的CheckPoint认证 156-315.65题库，其全名为：(Check Point Certified Expert NGX R65). 在您决定是否购买之前 可以先下载156-315.65题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-315.65模拟测试题的下载链接

免费的156-315.65题库PDF下载链接

CheckPoint 156-315.65学习指南

CheckPoint认证 156-315.65考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-315.65学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-315.65考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-315.65是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-315.65考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-315.65考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-315.65试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-315.65考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-915.1题库Demo赏析

　
　
Exam : Check Point 156-915.1
Title : Accelerated CCSE 1.1 NGX

1. Jeremy manages sites in Tokyo, Calcutta and Dallas, from his office in Chicago. He is trying to create a report for management, detailing the current software level of each Security Gateway. He also wants to create a proposal outline, listing the most cost-effective way to upgrade his Gateways. Which two SmartConsole applications should Jeremy use, to create his report and outline?
A. SmartLSM and SmartUpdate
B. SmartDashboard and SmartLSM
C. SmartDashboard and SmartView Tracker
D. SmartView Monitor and SmartUpdate
E. SmartView Tracker and SmartView Monitor
Answer: D

2. Eric wants to see all URLs’ full destination paths in the SmartView Tracker logs, not just the fully qualified domain name of the Web servers. For example, the information filed of a log entry displays the URL http: //hp.msn.com/css/home/hpcl1012.css. How can Eric best customize SmartView Tracker to see the logs he wants? Configure the URI resource, and select:
A. "transparent" as the connection method
B. "tunneling" as the connection method
C. "optimize URL logging"; use the URI resource in the rule, with action "accept"
D. "Enforce URL capability"; use the URI resource in the rule, with action "accept"
Answer: C

3. How can you reset Secure Internal Communications (SIC) between a SmartCenter Server and Security Gateway?
A. From the SmartCenter Server’s command line type fw putkey -p <shared key> <IP Address of SmartCenter Server>.
B. From the SmartCenter Server’s command line type fw putkey -p <shared key> <IP Address of Security Gateway>.
C. Run the command fwm sic_reset to reinitialize the Internal Certificate Authority (ICA) of the SmartCenter Server. Then retype the activation key on the Security Gateway from SmartDashboard.
D. From cpconfig on the SmartCenter Server, choose the Secure Internal Communication option and retype the activation key.Next, retype the same key in the gateway object in SmartDashboard and reinitialize Secure Internal Communications (SIC).
E. Use SmartUpdate to retype the activation key of the Security Gateway.
Answer: D

4. When Load Sharing Multicast mode is defined in a ClusterXL cluster object, how are packets being handled by cluster members?
A. All cluster members process all packets, and members synchronize with each other.
B. All members receive all packets. The SmartCenter Server decides which member will process the packets. Other members simply drop the packets.
C. Only one member at a time is active. The active cluster member processes all packets.
D. All members receive all packets. An algorithm detemines which member processes packets, and which member drops packets.
Answer: D

5. Your VPN Community includes three Security Gateways. Each Gateway has its own internal network defined as a VPN Domain. You must test the VPN-1 NGX route-based VPN feature, without stopping the VPN. What is the correct order of steps?
A. 1. Add a new interface on each Gateway.
2. Remove the newly added network from the current VPN Domain for each Gateway.
3. Create VTIs on each Gateway, to point to the other two peers
4. Enable advanced routing on all three Gateways.
B. 1. Add a new interface on each Gateway.
2. Remove the newly added network from the current VPN Domain in each gateway object.
3. Create VPN Tunnel Interfaces (VTI) on each gateway object, to point to the other two peers.
4. Add static routes on three Gateways, to route the new network to each peer"s VTI interface.
C. 1. Add a new interface on each Gateway.
2. Add the newly added network into the existing VPN Domain for each Gateway.
3. Create VTIs on each gateway object, to point to the other two peers.
4. Enable advanced routing on all three Gateways.
D. 1. Add a new interface on each Gateway.
2. Add the newly added network into the existing VPN Domain for each gateway object.
3. Create VTIs on each gateway object, to point to the other two peers.
4. Add static routes on three Gateways, to route the new networks to each peer’s VTI interface.
Answer: B

6. You are reviewing SmartView Tracker entries, and see a Connection Rejection on a Check Point QoS rule. What causes the Connecion Rejection?
A. No QoS rule exists to match the rejected traffic.
B. The number of guaranteed connections is exceeded. The rule’s action properties are not set to accept additional connections.
C. The Constant Bit Rate for a Low Latency Class has been exceeded by greater than 10%, and the Maximal Delay is set below requirements.
D. Burst traffic matching the Default Rule is exhausting the Check Point QoS global packet buffers.
E. The guarantee of one of the rule??s sub-rules exceeds the guarantee in the rule itself.
Answer: B

7. How can you unlock an administrator’s account, which was been locked due to SmartCenter Access settings in Global Properties?
A. Type fwm lock_admin -ua from the command line of the SmartCenter Server.
B. Clear the "locked" box of the user’s General Properties in SmartDashboard.
C. Type fwm unlock_admin -ua from the command line of the SmartCenter Server
D. Type fwm unlock_admin -ua from the command line of the Security Gateway.
E. Delete the file admin.lock in the $FWDIR/tmp/directory of the SmartCenter Server.
Answer: A

8. Your organization has many VPN-1 Edge gateways at various branch offices, to allow VPN-1 SecureClient users to access company resources. For security reasons, your organization’s Security Policy requires all Internet traffic initiated behind the VPN-1 Edge gateways first be inspected by your headquarters’ VPN-1 Pro Security Gateway. How do you configure VPN routing in this star VPN Community?
A. To the Internet and other targets only
B. To the center and other satellites, through the center
C. To the center only
D. To the center, or through the center to other satellites, then to the Internet and other VPN targets
Answer: D

9. Your NGX Enterprise SmartCenter Server is working normally. However, you must reinstall the SmartCenter Server, but keep the SmartCenter Server configuration (for example, all Security Policies, database, etc.) How would you reinstall the Server and keep its configuration?
A. 1.Run the latest upgrade_export utility to export the configuration
2.Keep the exported file in the same location.
3.Use SmartUpdate to reinstall the SmartCenter Server.
4.Run upgrade_import to import the configuration.
B. 1.Run the latest upgrade_export utility to export the configuration
2.Leave the exported. tgz file in $ FWDIR.
3.Install the primary SmartCenter Server on top of the configuration
4.Run upgrade_import to import the configuration.
C. 1. Insert the NGX CD-ROM, and select the option to export the configuration into a.tgz file
2. Transfer the .tgz fiel to another networked maching.
3. Uninstall all NGX packages, and reboot.
4. Use the NGX CD-ROM to select the upgrade_import option to import the configuration.
D. 1. Download the latest upgrade_export utility, and run it from $FWDIRbin to export the confirguration into a.tgz file.
2. Transfer the .tgz file to another network machine.
3. Uninstall all NGX packages and reboot.
4. Install a new primary SmartCenter Server.
5. Run upgrade_import to import the configuration
Answer: D

10. In a Management High Availablility (HA) configuration, you can configure synchronization to occur automatically, when:
1. The Security Policy is installed.
2. The Security Policy is saved.
3. The Security Administrator logs in to the secondary SmartCenter Server, and changes its status to active.
4. A scheduled event occurs.
5. The user database is installed.
Select the BEST response for the synchronization sequence. Choose one.
A. 1,2,3
B. 1,2,3,4
C. 1,3,4
D. 1,2,5
E. 1,2,4
Answer: E

11. Nelson is a consultant. He is at a customer’s site reviewing configuration and logs as part of a security audit. Nelson sees logs accepting POP3 traffuc, but he does not see a rule allowing POP3 traffic in the Rule Base.
Which of the following is the most likely cause? The POP3:
A. service is a VPN-1 Control Connection
B. rule is hidden
C. service is accepted in Global Properties
D. service cannot be controlled by NGX
E. rule is disabled
Answer: B

12. When restoring NGX using the upgrade_import command, which of the following items are NOT restored?
A. Security Policies
B. Global properties
C. Licenses
D. User groups
E. Route tables
Answer: E

13. Your organization’s security infrastructure separates Security Gateways geographically. You must request a central license for one remote Security Gateway. How would you request and apply the license? Request a central license:
A. using the remote Gateway’s IP address. Apply the license locally with the cplic put command.
B. for the Gateways’ IP address. Apply the license on the SmartCenter Server with the cprlic put command.
C. using the remote Gateway’s IP address. Attach the license to the remote Gateway via SmartUpdate.
D. using your SmartCenter Server’s IP address. Attach the license to the remote Gateway via SmartUpdate.
E. using the SmartCenter Server’s IP address. Apply the license locally on the remote Gateway with the cplic put command.
Answer: D

14. In SmartView Tracker, which rule shows when a packet is dropped due to anti-spoofing?
A. Rule 0
B. Cleanup Rule
C. Rule 1
D. Rule 999
E. Stealth Rule
Answer: A

15. After importing the NGX schema into an LDAP server, what should you enable?
Schema checking
A. Encryption
B. UserAuthority
C. ConnectControl
D. Secure Internal Communications
Answer: A

16. Which Check Point QoS feature allows a Security Administrator to define special classes of service for delay-sensitive applications?
A. Weighted Fair Queuing
B. Limits
C. Differentiated Services
D. Low Latency Queueing
E. Guarantees
Answer: D

17. Steve tries to configure Directional VPN Rule Match in the Rule Base. But the Match column does not have the option to see the Directional Match. Steve sees the following screen. What is the problem?
A. Steve must enable directional_match(true) in the objectes_5_0.C file on SmartCenter Server.
B. Steve must enable Advanced Routing on each Security Gateway.
C. Steve must enable VPN Directional Match on the VPN Advanced screen, in Global properties.
D. Steve must enable a dynamic-routing protocol, such as OSPF, on the Gateways.
E. Steve must enable VPN Directional Match on the gateway object??s VPN tab.
Answer: C

18. You are preparing to configure your VoIP Domain Gatekeeper object. Which two other objects should you have created first?
A. An object to represent the IP phone network, AND an object to represent the host on which the proxy is installed.
B. An object to represent the PSTN phone network, AND an object to represent the IP phone network
C. An object to represent the IP phone network, AND an object to represent the host on which the gatekeeper is installed.
D. An object to represent the Q.931 service origination host. AND an object to represent the H.245 termination host.
E. An object to represent the call manager. AND an object to represent the host on which the transmission router is installed.
Answer: C

19. Select the correct statement about Secure Internal Communications (SIC) Certificates? SIC Certificates:
A. for NGX Security Gateways are created during the SmartCenter Server installation.
B. for the SmartCenter Server are created during the SmartCenter Server installation.
C. are used for securing internal network communications between the SmartView Tracker and an OPSEC device.
D. decrease network security by securing administrative communication among the SmartCenter Servers and the Security Gateway.
E. uniquely identify Check Point enable machines; they have the same function as Authentication Certificates.
Answer: B

20. What is the command to see the licenses of the Security Gateway FWDALLAS from your SmartCenter Server?
A. cprlic print FWDALLAS
B. fw licprint FWDALLAS
C. fw tab -t fwlic FWDALLAS
D. cplic print FWDALLAS
E. fw lic print FWDALLAS
Answer: A

免费下载156-915.1题库Demo

Examsoon提供最新的CheckPoint认证 156-915.1题库，其全名为：(Accelerated CCSE 1.1 NGX). 在您决定是否购买之前 可以先下载156-915.1题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-915.1模拟测试题的下载链接

免费的156-915.1题库PDF下载链接

CheckPoint 156-915.1学习指南

CheckPoint认证 156-915.1考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-915.1学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-915.1考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-915.1是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-915.1考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-915.1考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-915.1试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-915.1考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-315.1题库Demo赏析

　
　
Exam : Check Point 156-315.1
Title : Check Point Certified Security Expert NGX

1. To change an existing ClusterXL cluster object from Multicast to Unicast mode, what configuration change must be made?
A. Change the cluster mode to Unicast on the cluster object. Reinstall the Security Policy.
B. Reset Secure Internal Communications (SIC) on the cluster-member objects. Reinstall the Security Policy.
C. Run cpstop and cpstart, to re-enable High Availability on both objects. Select Pivot mode in cpconfig.
D. Change the cluster mode to Unicast on the cluster-member object.
E. Switch the internal network’s default Security Gateway to the pivot machine’s IP address.
Answer: A

2. You are preparing a lab for a ClusterXL environment, with the following topology:
Vip internal cluster IP = 172.16.10.1; Vip external cluster IP = 192.168.10.3
Cluster Member 1: four NICs, three enabled: qfe0: 192.168.10.1/24, qfe1: 10.10.10.1/24, qfe2: 172.16.10.1/24
Cluster Member 2: five NICs, three enabled; hme0: 192.168.10.2/24, eth1: 10.10.10.2/24, eth2: 172.16.10.2/24
Member Network tab on internal-cluster interface: is 10.10.10.0, 255.255.255.0
SmartCenter Pro Server: 172.16.10.3
External interfaces 192.168.10.1 and 192.168.10.2 connect to a Virtual Local Area Network (VLAN) switch. The upstream router connects to the same VLAN switch. Internal interfaces 10.10.10.1 and 10.10.10.2 connect to a hub. There is no other machine in the 10.10.10.0 network. 172.19.10.0 is the synchronization network. What is the problem with this configuration?
A. The SmartCenter Pro Server cannot be in the synchronization network.
B. There is no problem with this configuration. It is correct.
C. Members do not have the same number of NICs.
D. The internal network does not have a third cluster member.
E. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

3. You are preparing to deploy a VPN-1 Pro Gateway for VPN-1 NGX. You have five systems to choose from for the new Gateway, and you must conform to the following requirements:
Operating-system vendor’s license agreement
Check Point’s license agreement
Minimum operating-system hardware specification
Minimum Gateway hardware specification
Gateway installed on a supported operating system (OS)
Which machine meets ALL of the following requirements?
A. Processor: 1.1 GHz
RAM: 512 MB
Hard disk: 10 GB
OS: Windows 2000 Workstation
B. Processor: 2.0 GHz
RAM: 512 MB
Hard disk: 10 GB
OS: Windows ME
C. Processor: 1.5 GHz
RAM: 256 MB
Hard disk: 20 GB
OS: Red Hat Linux 8.0
D. Processor: 1.67 GHz
RAM: 128 MB
Hard disk: 5 GB
OS: FreeBSD
E. Processor: 2.2 GHz
RAM: 256 MB
Hard disk: 20 GB
OS: Windows 2000 Server
Answer: E

4. You want to upgrade a SecurePlatform NG with Application Intelligence (AI) R55 Gateway to SecurePlatform NGX R60 via SmartUpdate. Which package is needed in the repository before upgrading?
A. SVN Foundation and VPN-1 Express/Pro
B. VPN-1 and FireWall-1
C. SecurePlatform NGX R60
D. SVN Foundation
E. VPN-1 Pro/Express NGX R60
Answer: C

5. Regarding QoS guarantees and limits, which of the following statements is FALSE?
A. The guarantee of a sub-rule cannot be greater than the guarantee defined for the rule above it.
B. If a guarantee is defined in a sub-rule, a guarantee must be defined for the rule above it.
C. A rule guarantee must not be less than the sum defined in the guarantees’ sub-rules.
D. If both a rule and per-connection limit are defined for a rule, the per-connection limit must not be greater than the rule limit.
E. If both a limit and guarantee per rule are defined in a QoS rule, the limit must be smaller than the guarantee.
Answer: E

6. Robert has configured a Common Internet File System (CIFS) resource to allow access to the public partition of his company’s file server, on \eriscogoldenapplefilespublic. Robert receives reports that users are unable to access the shared partition, unless they use the file server’s IP address. Which of the following is a possible cause?
A. Mapped shares do not allow administrative locks.
B. The CIFS resource is not configured to use Windows name resolution.
C. Access violations are not logged.
D. Remote registry access is blocked.
E. Null CIFS sessions are blocked.
Answer: B

7. The following rule contains an FTP resource object in the Service field:
Source: local_net
Destination: Any
Service: FTP-resource object
Action: Accept
How do you define the FTP Resource Properties > Match tab to prevent internal users from sending corporate files to external FTP servers, while allowing users to retrieve files?
A. Enable the "Get" method on the match tab.
B. Disable "Get" and "Put" methods on the Match tab.
C. Enable the "Put" and "Get" methods.
D. Enable the "Put" method only on the match tab.
E. Disable the "Put" method globally.
Answer: A

8. Which service type does NOT invoke a Security Server?
A. HTTP
B. FTP
C. Telnet
D. CIFS
E. SMTP
Answer: D

9. Your current VPN-1 NG with Application Intelligence (AI) R55 stand-alone VPN-1 Pro Gateway and SmartCenter Server run on SecurePlatform. You plan to implement VPN-1 NGX in a distributed environment, where the existing machine will be the SmartCenter Server, and a new machine will be the VPN-1 Pro Gateway only. You need to migrate the NG with AI R55 SmartCenter Server configuration, including such items as Internal Certificate Authority files, databases, and Security Policies.
How do you request a new license for this VPN-1 NGX upgrade?
A. Request a VPN-1 NGX SmartCenter Server license, using the new machine’s IP address. Request a new local license for the NGX VPN-1 Pro Gateway.
B. Request a VPN-1 NGX SmartCenter Server license, using the new machine’s IP address. Request a new central license for the NGX VPN-1 Pro Gateway.
C. Request a new VPN-1 NGX SmartCenter Server license, using the NG with AI SmartCenter Server IP address. Request a new central license for the NGX VPN-1 Pro Gateway.
D. Request a VPN-1 NGX SmartCenter Server license, using the NG with AI SmartCenter Server IP address. Request a new central license for the NGX VPN-1 Pro Gateway, licensed for the existing SmartCenter Server IP address.
Answer: D

10. VPN-1 NGX supports VoIP traffic in all of the following environments, EXCEPT which environment?
A. H.323
B. SIP
C. MEGACO
D. SCCP
E. MGCP
Answer: C

11. Which of the following QoS rule-action properties is an Advanced action type, only available in Traditional mode?
A. Guarantee Allocation
B. Rule weight
C. Apply rule only to encrypted traffic
D. Rule limit
E. Rule guarantee
Answer: A

12. If you check the box "Use Aggressive Mode", in the IKE Properties dialog box:
A. The standard three-packet IKE Phase 1 exchange is replaced by a six-packet exchange.
B. The standard six-packet IKE Phase 2 exchange is replaced by a three-packet exchange.
C. The standard three-packet IKE Phase 2 exchange is replaced by a six-packet exchange.
D. The standard six-packet IKE Phase 1 exchange is replaced by a three-packet exchange.
E. The standard six-packet IKE Phase 1 exchange is replaced by a twelve-packet exchange.
Answer: D

13. You want to upgrade a cluster with two members to VPN-1 NGX. The SmartCenter Server and both members are version VPN-1/FireWall-1 NG FP3, with the latest Hotfix. What is the correct upgrade procedure?
1. Change the version, in the General Properties of the gateway-cluster object.
2. Upgrade the SmartCenter Server, and reboot after upgrade.
3. Run cpstop on one member, while leaving the other member running. Upgrade one member at a time, and reboot after upgrade.
4. Reinstall the Security Policy.
A. 3, 2, 1, 4
B. 2, 4, 3, 1
C. 1, 3, 2, 4
D. 2, 3, 1, 4
E. 1, 2, 3, 4
Answer: D

14. Greg is creating rules and objects to control VoIP traffic in his organization, through a VPN-1 NGX Security Gateway. Greg creates VoIP Domain SIP objects to represent each of his organization’s three SIP gateways. Greg then creates a simple group to contain the VoIP Domain SIP objects. When Greg attempts to add the VoIP Domain SIP objects to the group, they are not listed. What is the problem?
A. The related end-points domain specifies an address range.
B. VoIP Domain SIP objects cannot be placed in simple groups.
C. The installed VoIP gateways specify host objects.
D. The VoIP gateway object must be added to the group, before the VoIP Domain SIP object is eligible to be added to the group.
E. The VoIP Domain SIP object’s name contains restricted characters.
Answer: B

15. Which of the following commands shows full synchronization status?
A. cphaprob -i list
B. cphastop
C. fw ctl pstat
D. cphaprob -a if
E. fw hastat
Answer: A

16. How can you prevent delay-sensitive applications, such as video and voice traffic, from being dropped due to long queues when using a Check Point QoS solution?
A. Low latency class
B. DiffServ rule
C. guaranteed per connection
D. Weighted Fair Queuing
E. guaranteed per VoIP rule
Answer: A

17. The following is cphaprob state command output from a ClusterXL New mode High Availability member:When member 192.168.1.2 fails over and restarts, which member will become active?
A. 192.168.1.2
B. 192.168.1.1
C. Both members’ state will be standby
D. Both members’ state will be active
Answer: B

18. You set up a mesh VPN Community, so your internal networks can access your partner’s network, and vice versa. Your Security Policy encrypts only FTP and HTTP traffic through a VPN tunnel. All other traffic among your internal and partner networks is sent in clear text. How do you configure the VPN Community?
A. Disable "accept all encrypted traffic", and put FTP and HTTP in the Excluded services in the Community object. Add a rule in the Security Policy for services FTP and http, with the Community object in the VPN field.
B. Disable "accept all encrypted traffic" in the Community, and add FTP and HTTP services to the Security Policy, with that Community object in the VPN field.
C. Enable "accept all encrypted traffic", but put FTP and HTTP in the Excluded services in the Community. Add a rule in the Security Policy, with services FTP and http, and the Community object in the VPN field.
D. Put FTP and HTTP in the Excluded services in the Community object. Then add a rule in the Security Policy to allow Any as the service, with the Community object in the VPN field.
Answer: B

19. You want VPN traffic to match packets from internal interfaces. You also want the traffic to exit the Security Gateway, bound for all site-to-site VPN Communities, including Remote Access Communities. How should you configure the VPN match rule?
A. internal_clear > All_GwToGw
B. Communities > Communities
C. Internal_clear > External_Clear
D. Internal_clear > Communities
E. internal_clear > All_communities
Answer: E

20. You are preparing to configure your VoIP Domain Gatekeeper object. Which two other objects should you have created first?
A. An object to represent the IP phone network, AND an object to represent the host on which the proxy is installed
B. An object to represent the PSTN phone network, AND an object to represent the IP phone network
C. An object to represent the IP phone network, AND an object to represent the host on which the gatekeeper is installed
D. An object to represent the Q.931 service origination host, AND an object to represent the H.245 termination host
E. An object to represent the call manager, AND an object to represent the host on which the transmission router is installed
Answer: C

免费下载156-315.1题库Demo

Examsoon提供最新的CheckPoint认证 156-315.1题库，其全名为：(Check Point Certified Security Expert NGX). 在您决定是否购买之前 可以先下载156-315.1题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-315.1模拟测试题的下载链接

免费的156-315.1题库PDF下载链接

CheckPoint 156-315.1学习指南

CheckPoint认证 156-315.1考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-315.1学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-315.1考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-315.1是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-315.1考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-315.1考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-315.1试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-315.1考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-215.1题库Demo赏析

　
　
Exam : Check Point 156-215.1
Title : Check Point Certified Security Administrator NGX

1. Which SmartConsole tool verifies the installed Security Policy name?
A. SmartView Server
B. SmartUpdate
C. SmartView Status
D. Eventia Reporter
E. SmartView Monitor
Answer: E

2. In NGX, what happens if a Distinguished Name (DN) is NOT found in LDAP?
A. NGX takes the common-name value from the Certificate subject, and searches the LDAP account unit for a matching user id.
B. NGX searches the internal database for the username.
C. The Security Gateway uses the subject of the Certificate as the DN for the initial lookup.
D. If the first request fails or if branches do not match, NGX tries to map the identity to the user id attribute.
E. When users authenticate with valid Certificates, the Security Gateway tries to map the identities with users registered in the external LDAP user database.
Answer: B

3. You create implicit and explicit rules for the following network. The group object "internal-networks" includes networks 10.10.10.0 and 10.10.0. Assume "Accept ICMP requests" is enabled as before last in the Global Properties.Based on these rules, what happens if you Ping from host 10.10.10.5 to a host on the Internet, by IP address? ICMP will be:
A. dropped by rule 0.
B. dropped by rule 2, the Cleanup Rule.
C. accepted by rule 1.
D. dropped by the last implicit rule.
E. accepted by the implicit rule.
Answer: C

4. Which NGX logs can you configure to send to DShield.org?
A. Account and alert logs
B. SNMP and account logs
C. Active and alert logs
D. Audit and alert logs
E. Alert and user-defined alert logs
Answer: E

5. Brianna has three servers located in a DMZ, using private IP addresses. She wants internal users from 10.10.10.x to access the DMZ servers by public IP addresses. Internal_net 10.10.10.x is configured for Hide NAT behind the Security Gateway’s external interface.
What is the best configuration for 10.10.10.x users to access the DMZ servers, using the DMZ servers’ public IP addresses?
A. Configure automatic Static NAT rules for the DMZ servers.
B. Configure manual Static NAT rules to translate the DMZ servers, when connecting to the Internet.
C. Configure manual static NAT rules to translate the DMZ servers, when the source is the internal network 10.10.10.x.
D. Configure Hide NAT for the DMZ network behind the DMZ interface of the Security Gateway, when connecting to internal network 10.10.10.x.
E. Configure Hide NAT for 10.10.10.x behind DMZ’s interface, when trying to access DMZ servers.
Answer: C

6. When you change an implicit rule’s order from "last" to "first" in Global Properties, how do you make the change effective?
A. Close SmartDashboard, and reopen it.
B. Select install database from the Policy menu.
C. Select save from the file menu.
D. Reinstall the Security Policy.
E. Run fw fetch from the Security Gateway.
Answer: D

7. Your users are defined in a Windows 2000 Active Directory server. You must add LDAP users to a Client Authentication rule. Which kind of user group do you need in the Client Authentication rule in NGX?
A. All Users
B. A group with generic* user
C. External-user group
D. LDAP account-unit group
E. LDAP group
Answer: E

8. Choose the BEST sequence for configuring user management on SmartDashboard, for use with an LDAP server:
A. Enable LDAP in Global Properties, configure a host-node object for the LDAP Server, and configure a server object for the LDAP Account Unit.
B. Configure a workstation object for the LDAP server, configure a server object for the LDAP Account Unit, and enable LDAP in Global Properties.
C. Configure a server object for the LDAP Account Unit, enable LDAP in Global Properties, and create an LDAP server using an OPSEC application.
D. Configure a server object for the LDAP Account Unit, enable LDAP in Global Properties, and create an LDAP resource object.
E. Configure a server object for the LDAP Account Unit, and create an LDAP resource object.
Answer: A

9. Gary is a Security Administrator in a small company. He needs to determine if the company’s Web servers are accessed for an excessive number of times from the same host. How would he configure this setting in SmartDefense?
A. Successive multiple connections
B. HTTP protocol inspection
C. Successive alerts
D. General HTTP worm catcher
E. Successive DoS attacks
Answer: A

10. Which of the following commands is used to restore NGX configuration information?
A. cpconfig
B. cpinfo -i
C. restore
D. fwm dbimport
E. upgrade_import
Answer: E

11. Larry is the Security Administrator for a software-development company. To isolate the corporate network from the developers’ network, Larry installs an internal Security Gateway. Larry wants to optimize the performance of this Gateway. Which of the following actions is most likely to improve the Gateway’s performance?
A. Remove unused Security Policies from Policy Packages.
B. Clear all Global Properties check boxes, and use explicit rules.
C. Use groups within groups in the manual NAT Rule Base.
D. Put the least-used rules at the top of the Rule Base.
E. Use domain objects in rules, where possible.
Answer: A

12. If the LDAP scheme is not updated on the LDAP server, which Check Point user settings are stored locally in the Check Point user template?
A. Time settings, Authentication type, Location settings
B. Location settings, Authentication type, Password
C. Authentication type, Time settings, Password
D. Password, Authentication type, Time settings
Answer: A

13. Which of the following is the final step in an NGX backup?
A. Test restoration in a non-production environment, using the upgrade_import command.
B. Move the *.tgz file to another location.
C. Run the upgrade_export command.
D. Copy the conf directory to another location.
E. Run the cpstop command.
Answer: A

14. In SmartDashboard, you configure 45 MB as the required free hard-disk space to accommodate logs. What can you do to keep old log files, when free space falls below 45 MB?
A. Define a secondary SmartCenter Server as a log server, to transfer the old logs.
B. Configure a script to archive old logs to another directory, before old log files are deleted.
C. Do nothing. Old logs are deleted, until free space is restored.
D. Use the fwm logexport command to export the old log files to other location.
E. Do nothing. The SmartCenter Server archives old logs to another directory.
Answer: B

15. By default, when you click File > Switch Active File from SmartView Tracker, the SmartCenter Server:
A. Opens a new window with a previously saved log file.
B. Purges the current log file, and starts a new log file.
C. Purges the current log, and prompts you for the new log’s mode.
D. Saves the current log file, names the log file by date and time, and starts a new log file.
E. Prompts you to enter a filename, then saves the log file.
Answer: D

16. If a digital signature is used to achieve both data-integrity checking and verification of sender, digital signatures are only used when implementing:
A. A symmetric encryption algorithm.
B. CBL-DES.
C. ESP.
D. An asymmetric encryption algorithm.
E. Triple DES.
Answer: D

17. You are setting up a Virtual Private Network, and must select an encryption scheme. Network performance is a critical issue – even more so than the security of the packet. Which encryption scheme would you select?
A. In-place encryption
B. Tunneling mode encryption
C. Either one will work without compromising performance
Answer: A

18. How do you block some seldom-used FTP commands, such as CWD, and FIND from passing through the Gateway?
A. Use FTP Security Server settings in SmartDefense.
B. Use an FTP resource object.
C. Configure the restricted FTP commands in the Security Servers screen of the Global properties.
D. Enable FTP Bounce checking in SmartDefense.
E. Add the restricted commands to the aftpd.conf file in the SmartCenter Server.
Answer: A

19. Ellen is performing penetration tests against SmartDefense for her Web server farm. She needs to verify that the Web servers are secure against traffic hijacks. She has selected the "Products > Web Server" box on each of the node objects. What other settings would be appropriate? Ellen:
A. needs to configure TCP defenses such as "Small PMTU" size.
B. should enable all settings in Web Intelligence.
C. needs to create resource objects for the web farm servers and configure rules for the web farm.
D. must activate the Cross-Site Scripting property.
E. should also enable the Web intelligence > SQL injection setting.
Answer: D

20. Frank wants to know why users on the corporate network cannot receive multicast transmissions from the Internet. An NGX Security Gateway protects the corporate network from the Internet. Which of the following is a possible cause for the connection problem?
A. NGX does not support multicast routing protocols and streaming media through the Security Gateway.
B. Frank did not install the necessary multicast license with SmartUpdate, when he upgraded to NGX.
C. The Multicast Rule is below the Stealth Rule. NGX can only pass multicast traffic, if the Multicast Rule is above the Stealth Rule.
D. Multicast restrictions are not configured properly on the corporate internal network interface properties of the Security Gateway object.
E. Anti-spoofing is enabled. NGX cannot pass multicast traffic, if anti-spoofing is enabled.
Answer: D

免费下载156-215.1题库Demo

Examsoon提供最新的CheckPoint认证 156-215.1题库，其全名为：(Check Point Certified Security Administrator NGX). 在您决定是否购买之前 可以先下载156-215.1题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-215.1模拟测试题的下载链接

免费的156-215.1题库PDF下载链接

CheckPoint 156-215.1学习指南

CheckPoint认证 156-215.1考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-215.1学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-215.1考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-215.1是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-215.1考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-215.1考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-215.1试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-215.1考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-915.65题库Demo赏析

Examsoon官方网站最新的156-915.65题库详细信息

CheckPoint 156-915.65学习指南

CheckPoint认证 156-915.65考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-915.65学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-915.65考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-915.65是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-915.65考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-915.65考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-915.65试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-915.65考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-310题库Demo赏析

Examsoon官方网站最新的156-310题库详细信息

CheckPoint 156-310学习指南

CheckPoint认证 156-310考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-310学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-310考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-310是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-310考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-310考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-310试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-310考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-315题库Demo赏析

　
　
Exam : Check Point 156-315
Title : Check Point Certified Security Expert NGX

1. The following rule contains an FTP resource object in the Service field:
Source: local_net
Destination: Any
Service: FTP-resource object
Action: Accept
How do you define the FTP Resource Properties > Match tab to prevent internal users from sending corporate files to external FTP servers, while allowing users to retrieve files?
A. Enable the "Get" method on the match tab.
B. Disable "Get" and "Put" methods on the Match tab.
C. Enable the "Put" and "Get" methods.
D. Enable the "Put" method only on the match tab.
E. Disable the "Put" method globally.
Answer: A

2. Your current VPN-1 NG with Application Intelligence (AI) R55 stand-alone VPN-1 Pro Gateway and SmartCenter Server run on SecurePlatform. You plan to implement VPN-1 NGX in a distributed environment, where the existing machine will be the SmartCenter Server, and a new machine will be the VPN-1 Pro Gateway only. You need to migrate the NG with AI R55 SmartCenter Server configuration, including such items as Internal Certificate Authority files, databases, and Security Policies.
How do you request a new license for this VPN-1 NGX upgrade?
A. Request a VPN-1 NGX SmartCenter Server license, using the new machine’s IP address. Request a new local license for the NGX VPN-1 Pro Gateway.
B. Request a VPN-1 NGX SmartCenter Server license, using the new machine’s IP address. Request a new central license for the NGX VPN-1 Pro Gateway.
C. Request a new VPN-1 NGX SmartCenter Server license, using the NG with AI SmartCenter Server IP address. Request a new central license for the NGX VPN-1 Pro Gateway.
D. Request a VPN-1 NGX SmartCenter Server license, using the NG with AI SmartCenter Server IP address. Request a new central license for the NGX VPN-1 Pro Gateway, licensed for the existing SmartCenter Server IP address.
Answer: D

3. If you check the box "Use Aggressive Mode", in the IKE Properties dialog box:
A. The standard three-packet IKE Phase 1 exchange is replaced by a six-packet exchange.
B. The standard six-packet IKE Phase 2 exchange is replaced by a three-packet exchange.
C. The standard three-packet IKE Phase 2 exchange is replaced by a six-packet exchange.
D. The standard six-packet IKE Phase 1 exchange is replaced by a three-packet exchange.
E. The standard six-packet IKE Phase 1 exchange is replaced by a twelve-packet exchange.
Answer: D

4. You set up a mesh VPN Community, so your internal networks can access your partner’s network, and vice versa. Your Security Policy encrypts only FTP and HTTP traffic through a VPN tunnel. All other traffic among your internal and partner networks is sent in clear text. How do you configure the VPN Community?
A. Disable "accept all encrypted traffic", and put FTP and HTTP in the Excluded services in the Community object. Add a rule in the Security Policy for services FTP and http, with the Community object in the VPN field.
B. Disable "accept all encrypted traffic" in the Community, and add FTP and HTTP services to the Security Policy, with that Community object in the VPN field.
C. Enable "accept all encrypted traffic", but put FTP and HTTP in the Excluded services in the Community. Add a rule in the Security Policy, with services FTP and http, and the Community object in the VPN field.
D. Put FTP and HTTP in the Excluded services in the Community object. Then add a rule in the Security Policy to allow Any as the service, with the Community object in the VPN field.
Answer: B

5. Greg is creating rules and objects to control VoIP traffic in his organization, through a VPN-1 NGX Security Gateway. Greg creates VoIP Domain SIP objects to represent each of his organization’s three SIP gateways. Greg then creates a simple group to contain the VoIP Domain SIP objects. When Greg attempts to add the VoIP Domain SIP objects to the group, they are not listed. What is the problem?
A. The related end-points domain specifies an address range.
B. VoIP Domain SIP objects cannot be placed in simple groups.
C. The installed VoIP gateways specify host objects.
D. The VoIP gateway object must be added to the group, before the VoIP Domain SIP object is eligible to be added to the group.
E. The VoIP Domain SIP object’s name contains restricted characters.
Answer: B

6. Robert has configured a Common Internet File System (CIFS) resource to allow access to the public partition of his company’s file server, on \eriscogoldenapplefilespublic. Robert receives reports that users are unable to access the shared partition, unless they use the file server’s IP address. Which of the following is a possible cause?
A. Mapped shares do not allow administrative locks.
B. The CIFS resource is not configured to use Windows name resolution.
C. Access violations are not logged.
D. Remote registry access is blocked.
E. Null CIFS sessions are blocked.
Answer: B

7. How can you prevent delay-sensitive applications, such as video and voice traffic, from being dropped due to long queues when using a Check Point QoS solution?
A. Low latency class
B. DiffServ rule
C. guaranteed per connection
D. Weighted Fair Queuing
E. guaranteed per VoIP rule
Answer: A

8. You are preparing to deploy a VPN-1 Pro Gateway for VPN-1 NGX. You have five systems to choose from for the new Gateway, and you must conform to the following requirements:
Operating-system vendor’s license agreement
Check Point’s license agreement
Minimum operating-system hardware specification
Minimum Gateway hardware specification
Gateway installed on a supported operating system (OS)
Which machine meets ALL of the following requirements?
A. Processor: 1.1 GHz
RAM: 512 MB
Hard disk: 10 GB
OS: Windows 2000 Workstation
B. Processor: 2.0 GHz
RAM: 512 MB
Hard disk: 10 GB
OS: Windows ME
C. Processor: 1.5 GHz
RAM: 256 MB
Hard disk: 20 GB
OS: Red Hat Linux 8.0
D. Processor: 1.67 GHz
RAM: 128 MB
Hard disk: 5 GB
OS: FreeBSD
E. Processor: 2.2 GHz
RAM: 256 MB
Hard disk: 20 GB
OS: Windows 2000 Server
Answer: E

9. VPN-1 NGX supports VoIP traffic in all of the following environments, EXCEPT which environment?
A. H.323
B. SIP
C. MEGACO
D. SCCP
E. MGCP
Answer: C

10. You are preparing to configure your VoIP Domain Gatekeeper object. Which two other objects should you have created first?
A. An object to represent the IP phone network, AND an object to represent the host on which the proxy is installed
B. An object to represent the PSTN phone network, AND an object to represent the IP phone network
C. An object to represent the IP phone network, AND an object to represent the host on which the gatekeeper is installed
D. An object to represent the Q.931 service origination host, AND an object to represent the H.245 termination host
E. An object to represent the call manager, AND an object to represent the host on which the transmission router is installed
Answer: C

11. To change an existing ClusterXL cluster object from Multicast to Unicast mode, what configuration change must be made?
A. Change the cluster mode to Unicast on the cluster object. Reinstall the Security Policy.
B. Reset Secure Internal Communications (SIC) on the cluster-member objects. Reinstall the Security Policy.
C. Run cpstop and cpstart, to re-enable High Availability on both objects. Select Pivot mode in cpconfig.
D. Change the cluster mode to Unicast on the cluster-member object.
E. Switch the internal network’s default Security Gateway to the pivot machine’s IP address.
Answer: A

12. You want VPN traffic to match packets from internal interfaces. You also want the traffic to exit the Security Gateway, bound for all site-to-site VPN Communities, including Remote Access Communities. How should you configure the VPN match rule?
A. internal_clear > All_GwToGw
B. Communities > Communities
C. Internal_clear > External_Clear
D. Internal_clear > Communities
E. internal_clear > All_communities
Answer: E

13. The following is cphaprob state command output from a ClusterXL New mode High Availability member:When member 192.168.1.2 fails over and restarts, which member will become active?
A. 192.168.1.2
B. 192.168.1.1
C. Both members’ state will be standby
D. Both members’ state will be active
Answer: B

14. Which of the following QoS rule-action properties is an Advanced action type, only available in Traditional mode?
A. Guarantee Allocation
B. Rule weight
C. Apply rule only to encrypted traffic
D. Rule limit
E. Rule guarantee
Answer: A

15. Which service type does NOT invoke a Security Server?
A. HTTP
B. FTP
C. Telnet
D. CIFS
E. SMTP
Answer: D

16. You want to upgrade a cluster with two members to VPN-1 NGX. The SmartCenter Server and both members are version VPN-1/FireWall-1 NG FP3, with the latest Hotfix. What is the correct upgrade procedure?
1. Change the version, in the General Properties of the gateway-cluster object.
2. Upgrade the SmartCenter Server, and reboot after upgrade.
3. Run cpstop on one member, while leaving the other member running. Upgrade one member at a time, and reboot after upgrade.
4. Reinstall the Security Policy.
A. 3, 2, 1, 4
B. 2, 4, 3, 1
C. 1, 3, 2, 4
D. 2, 3, 1, 4
E. 1, 2, 3, 4
Answer: D

17. You are preparing a lab for a ClusterXL environment, with the following topology:
Vip internal cluster IP = 172.16.10.1; Vip external cluster IP = 192.168.10.3
Cluster Member 1: four NICs, three enabled: qfe0: 192.168.10.1/24, qfe1: 10.10.10.1/24, qfe2: 172.16.10.1/24
Cluster Member 2: five NICs, three enabled; hme0: 192.168.10.2/24, eth1: 10.10.10.2/24, eth2: 172.16.10.2/24
Member Network tab on internal-cluster interface: is 10.10.10.0, 255.255.255.0
SmartCenter Pro Server: 172.16.10.3
External interfaces 192.168.10.1 and 192.168.10.2 connect to a Virtual Local Area Network (VLAN) switch. The upstream router connects to the same VLAN switch. Internal interfaces 10.10.10.1 and 10.10.10.2 connect to a hub. There is no other machine in the 10.10.10.0 network. 172.19.10.0 is the synchronization network. What is the problem with this configuration?
A. The SmartCenter Pro Server cannot be in the synchronization network.
B. There is no problem with this configuration. It is correct.
C. Members do not have the same number of NICs.
D. The internal network does not have a third cluster member.
E. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

18. You want to upgrade a SecurePlatform NG with Application Intelligence (AI) R55 Gateway to SecurePlatform NGX R60 via SmartUpdate. Which package is needed in the repository before upgrading?
A. SVN Foundation and VPN-1 Express/Pro
B. VPN-1 and FireWall-1
C. SecurePlatform NGX R60
D. SVN Foundation
E. VPN-1 Pro/Express NGX R60
Answer: C

19. Regarding QoS guarantees and limits, which of the following statements is FALSE?
A. The guarantee of a sub-rule cannot be greater than the guarantee defined for the rule above it.
B. If a guarantee is defined in a sub-rule, a guarantee must be defined for the rule above it.
C. A rule guarantee must not be less than the sum defined in the guarantees’ sub-rules.
D. If both a rule and per-connection limit are defined for a rule, the per-connection limit must not be greater than the rule limit.
E. If both a limit and guarantee per rule are defined in a QoS rule, the limit must be smaller than the guarantee.
Answer: E

20. Which of the following commands shows full synchronization status?
A. cphaprob -i list
B. cphastop
C. fw ctl pstat
D. cphaprob -a if
E. fw hastat
Answer: A

免费下载156-315题库Demo

Examsoon提供最新的CheckPoint认证 156-315题库，其全名为：(Check Point Certified Security Expert NGX). 在您决定是否购买之前 可以先下载156-315题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-315模拟测试题的下载链接

免费的156-315题库PDF下载链接

CheckPoint 156-315学习指南

CheckPoint认证 156-315考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-315学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-315考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-315是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-315考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-315考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-315试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-315考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-510题库Demo赏析

Examsoon官方网站最新的156-510题库详细信息

CheckPoint 156-510学习指南

CheckPoint认证 156-510考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-510学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-510考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-510是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-510考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-510考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-510试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-510考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；

免费156-215题库Demo赏析

　
　
Exam : Check Point 156-215
Title : Check Point Security Administration NGX

1. Upon checking SmartView Monitor, you find the following Critical Problem notification.
Select the best response.
A. No Security Policy installed on the Security Gateway
B. No Secure Internal Communications established between the SmartCenter Server and Security Gateway
C. Time not synchronized between the SmartCenter Server and Security Gateway
D. Version mismatch between the SmartCenter Server and Security Gateway
Answer: A

2. Your current security scenario gives you the option to choose between a stand-alone installation or a distributed installation. Which of the following factors would cause you to decide in favour of the stand-alone installation?
Select the best response.
A. You are required to use as few hardware resources as possible.
B. You are required to use Clientless VPN.
C. You are required to use Windows as operating system.
D. You are required to install HFA’s on the Security Gateway via SmartUpdate.
Answer: A

3. Initialize SIC for the Gateway object on the SmartCenter Server.
3. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object’s general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C

4. You are installing a SmartCenter server. Your security plan calls for three administrators for this particular server. How many can you create during installation?
Select the best response.
A. As many as you want
B. Only one with full access and one with read-only access
C. Depends on the license installed on the SmartCenter Server
D. Only one
Answer: D

5. The Internal Certificate Authority (ICA) is corrupt on your SmartCenter Server. The server is installed on a SecurePlatform machine in the MegaCorp home office. You use IP address 10.1.1.1. You need to have management connectivity restored to a Security Gateway on a second SecurePlatform computer, which plan to ship to another Administrator at a MegaCorp hub office. What is the correct order for restoring management connectivity on the Gateway before shipping it?
1. Run cpconfig on the Gateway, select "Secure Internal Communication", enter the activation key, and reconfirm.
2. Run fwm sic reset on the SmartCenter Server.
3. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object’s general screen, click Reset button, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 2, 1, 4, 5
B. 2, 3, 1, 4, 5
C. 1, 2, 3, 4
D. 1, 3, 2, 4, 5
Answer: A

6. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object’s general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C

7. Which SmartConsole tool would you use to verify the installed Security Policy name?
Select the best response.
A. SmartUpdate
B. SmartView Monitor
C. Eventia Reporter
D. SmartView Status
Answer: B

8. Your current security scenario gives you the option to choose between a stand-alone installation or a distributed installation. Which of the following factors would cause you to decide in favour of the distributed installation?
Select the best response.
A. You are required to use Clientless VPN.
B. You are required to use Windows as operating system.
C. You are required to use as few hardware resources as possible.
D. You are required to install HFA’s on the Security Gateway via SmartUpdate.
Answer: D

9. What is the reason?
A. No Security Policy installed on the Security Gateway
B. No Secure Internal Communications established between the SmartCenter Server and Security Gateway
C. Time not synchronized between the SmartCenter Server and Security Gateway
D. Version mismatch between the SmartCenter Server and Security Gateway
Answer: A

10. You installed SmartCenter Server on a computer running SecurePlatform in the MegaCorp home office. You use IP address 10. You also installed the Security Gateway on a second SecurePlatform computer, which you plan to ship to another Administrator at a MegaCorp hub office. What is the correct order for setting up SIC on the Gateway before shipping it?
1. Run cpconfig on the Gateway, select "Secure Internal Communication", enter the activation key, and reconfirm.
2. Initialize SIC for the Gateway object on the SmartCenter Server.
3. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object’s general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C

11. How can you reset the password of the Security Administrator, which was created during initial installation of the SmartCenter Server on SecurePlatform?
Select the best response.
A. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete the "Password" portion of the file. Then log in to the account without password. You will be prompted to assign a new password.
B. Type cpm a, and provide the existing administration account name. Reset the Security Administrator’s password.
C. Launch cpconfig and delete the Administrator’s account. Recreate the account with the same name.
D. Launch SmartDashboard, click the admin user account, and overwrite the existing Check Point Password.
Answer: C

12. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C

13. Click the Communication button in the gateway object’s general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C

14. Which SmartConsole tool would you use to see the last policy pushed in the audit log?
Select the best response.
A. SmartView Status
B. SmartView Server
C. SmartView Tracker
D. Eventia Reporter
Answer: C

15. Which SmartConsole tool would you use to verify the installed Security Policy name?
Select the best response.
A. Eventia Reporter
B. SmartView Status
C. SmartView Server
D. SmartView Monitor
E. SmartUpdate
Answer: D

16. Your current security scenario gives you the option to choose between a stand-alone installation or a distributed installation. Which of the following statements is TRUE for a stand-alone installation?
Select the best response.
A. You have the option to install a secondary SmartCenter Server.
B. Clientless VPN would not work in a distributed installation.
C. You cannot install HFA’s on the Security Gateway via SmartUpdate.
D. You are forced to use Windows as operating system.
Answer: C

17. Your current security scenario gives you the option to choose between a stand-alone installation or a distributed installation. Which of the following statements is TRUE for distributed installation?
Select the best response.
A. You have the option to install a secondary SmartCenter Server.
B. You are forced to use Windows as operating system.
C. You cannot install HFA’s on the Security Gateway via SmartUpdate.
D. Clientless VPN would not work in a distributed installation.
Answer: A

18. The third shift Administrator was updating SmartCenter Access settings in Global Properties. He managed to lock himself out of his account. How can you unlock this account?
Select the best response.
A. Type fwm lock_admin u from the command line of the SmartCenter Server.
B. Type fwm unlock_admin u from the command line of the Security Gateway.
C. Delete the file admin.lock in the $FWDIR/tmp/ directory of the SmartCenter Server.
D. Type fwm unlock_admin u from the command line of the SmartCenter Server.
Answer: A

19. How can you reset the password of the Security Administrator, which was created during initial installation of the SmartCenter Server on SecurePlatform?
Select the best response.
A. Type fwm a, and provide the existing administration account name. Reset the Security Administrator’s password.
B. Launch SmartDashboard, click the admin user account, and overwrite the existing Check Point Password.
C. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete the "Password" portion of the file. Then log in to the account without password. You will be prompted to assign a new password.
D. Launch cpunload and delete the Administrator’s account. Recreate the account with the same name.
Answer: A

20. The third shift Administrator was updating SmartCenter Access settings in Global Properties. He managed to lock all of the administrators out of their accounts. How can you unlock these accounts?
Select the best response.
A. Type fwm lock_admin ua from the command line of the SmartCenter Server.
B. Type fwm unlock_admin ua from the command line of the SmartCenter Server.
C. Type fwm unlock_admin ua from the command line of the Security Gateway.
D. Clear the "locked" box of the user’s General Properties in SmartDashboard.
Answer: A

免费下载156-215题库Demo

Examsoon提供最新的CheckPoint认证 156-215题库，其全名为：(Check Point Security Administration NGX ). 在您决定是否购买之前 可以先下载156-215题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费156-215模拟测试题的下载链接

免费的156-215题库PDF下载链接

CheckPoint 156-215学习指南

CheckPoint认证 156-215考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。CheckPoint认证 156-215学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试156-215考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。CheckPoint认证 156-215是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的156-215考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他156-215考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

Examsoon考题大师156-215试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加156-215考试，保证您一次轻松通过考试；

售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；