• hh0-200题库demo免费下载

  Filed under Hitachi
  Aug 3

  Hitachi认证hh0-200考试题库介绍

  考试代号: hh0-200
  问题数量:107 Q&As
  
  更新时间: 2009-09-21
  注册地点: Prometric/Pearson VUE
  题库全称:certified modular integration specialist exam

  免费hh0-200题库Demo赏析

  　
  　
  Exam : Hitachi HH0-200
  Title : Certified Modular Integration Specialist Exam

  1. What is the correct color coding scheme for ENC cables?
  A. yellow for Path 0 and Milky white for Path 1
  B. milky white for Path 0 and Yellow for Path 1
  C. yellow for Loop 0 and Milky white for Loop 1
  D. milky white for Loop 0 and Yellow for Loop 1
  Answer: B

  2. Which of the following parts can be downgraded while the 9500V is online?
  A. RKA
  B. Drive
  C. Cache
  D. Controller
  Answer: B

  3. A customer has Sun Netra Servers mounted on a Hitachi Data Systems?19 inch rack. You need to mount a RK and a RKA on the same rack. What is the amps/PS rating you need to use for both the RK and RKA together in order to ensure that the PDU is not overloaded when two power supplies are used on both the RK and the RKA and the source is 100V?
  A. 3.20
  B. 5.10
  C. 6.30
  D. 10.20
  Answer: C

  4. You are connected to a Hitachi Thunder 9500V?Series subsystem using a browser. How can you enter into Maintenance mode on it?
  A. press the Soft Reset button on both the controllers
  B. press the Rotary Set switch on the rear of the frame
  C. click "Go to Maintenance Mode" button on the left pane of the browser
  D. enter the IP address of the subsystem in the address field of the browser
  Answer: A

  5. You have assembled and installed a Hitachi Thunder 9570V?subsystemRK and a RKA into a 19 inch rack. The system parameters have also been configured. The customer now needs to use port 0A in order to connect HP-UX with a LUN 0 and Solaris with a LUN 0 on the same port. Which two will enable this configuration? (Choose two.)
  A. install the LUN SECURITY license
  B. create two host groups on port 0A
  C. install the LUN-MANAGEMENT license
  D. configure port 0A to work in HP-UX mode
  Answer: BC

  6. Which statement is true about cache slots on the Hitachi Thunder 9500V?Series subsystem?
  A. Each controller has two cache slots and each slot can hold 1GB DIMMS for a maximum of 2GB per controller.
  B. Each controller has two cache slots and each slot can hold 512MB or 1GB DIMMS for a maximum of 1GB or 2GB per controller.
  C. Each controller has four cache slots and each slot can hold 512MB or 1GB DIMMS for a maximum of 2 GB or 4GB per controller.
  D. Each controller has four cache slots and each slot can hold 256MB or 512MB DIMMS for a maximum of 1 GB or 2 GB per controller.
  Answer: B

  7. Ten LUNs must be recognized by the QLogic HBA on Microsoft Windows 2000 Server which is connected to a Hitachi Thunder 9500V?Series subsystem. What is the system parameter that needs to be set up?
  A. in the modify Host Group option, select CCHS mode in Standard mode
  B. in the modify Host Group option, select CCHS mode in Host connection mode
  C. in the modify Host Group option, select HISUP2 mode in Host connection mode
  D. in the modify Host Group option, select HISUP mode in Host connection mode 2
  Answer: D

  8. Which three operating systems can be used to install and run HDLM? (Choose three.)
  A. AIX
  B. OS/2
  C. HP-UX
  D. VxWorks
  E. Microsoft Windows 2000
  Answer: ACE

  9. What is the maximum distance between a host and a Hitachi Thunder 9500V?Series subsystem, when using short-wave Fibre Channel cable operating at data transfer speed of 200MB/s?
  A. 100 meters
  B. 200 meters
  C. 300 meters
  D. 400 meters
  Answer: C

  10. Which component on the first RKA is used to connect to the RK in a Hitachi Thunder 9570V?Series subsystem?
  A. PDB
  B. ENC unit
  C. Controller unit
  D. AC Power Unit
  Answer: B

  11. You are performing a Microprogram install for a customer on their Hitachi Thunder 9570V?Series subsystem. You receive message code RBA000 on the Web Access information messages. What does this message indicate?
  A. Installation failed.
  B. Installation failed in a part of the drive.
  C. Downgrade check result was "Not Good."
  D. There was another system when installation was started.
  Answer: C

  12. You are using the Hitachi?Resource Manager GUI for the first time. You want to change to a different mode from default mode. What is the first thing you should do, before changing to a different mode?
  A. go to Add-> Password and add the password
  B. go to Add-> Change Mode and select the mode
  C. go to Settings-> Password and register the password
  D. go to Settings-> Change Properties and set the mode option to other modes
  Answer: C

  13. A customer has purchased a floor model of a Hitachi Thunder 9570V?Series subsystem set up as RK + RKA + H2H Deskside Kit. Which two connections between the RK and the RKA are valid? (Choose two.)
  A. HSSDC#0 on Controller#0 of RK is connected to HSSDC#0 on ENC Unit#0 of RKA and HSSDC#1 on Controller#0 of RK is connected to HSSDC#1 on ENC Unit#0 of RKA.
  B. HSSDC#0 on Controller#0 of RK is connected to HSSDC#1 on ENC Unit#0 of RKA and HSSDC#1 on Controller#0 of RK is connected to HSSDC#0 on ENC Unit#0 of RKA.
  C. HSSDC#0 on Controller#1 of RK is connected to HSSDC#0 on ENC Unit#1 of RKA and HSSDC#1 on Controller#1 of RK is connected to HSSDC#1 on ENC Unit#1 of RKA.
  D. HSSDC#0 on Controller#1 of RK is connected to HSSDC#1 on ENC Unit#1 of RKA and HSSDC#1 on Controller#1 of RK is connected to HSSDC#0 on ENC Unit#1 of RKA.
  Answer: AC

  14. A Hitachi Thunder 9500V?Series subsystem shows a warning regarding a drop in voltage of the cache battery. Which two statements are true about the subsystem’s condition? (Choose two.)
  A. The Write Cache function is disabled.
  B. Normal operation is ensured because of Write-through mode.
  C. To prevent data loss, you should replace the battery within 10 minutes.
  D. Read performance in increased as the disks are being directly accessed.
  E. The warning indication may take up to two working days to disappear automatically.
  Answer: AB

  15. What is the operational humidity requirement at a site when installing a Hitachi Thunder 9500V?Series subsystem?
  A. 5% to 90%
  B. 8% to 80%
  C. 10% to 75%
  D. 10% to 90%
  Answer: B

  16. What do you use to capture Simple or CTL Alarm trace information?
  A. HiCommand
  B. Web Access
  C. Hitachi?Resource Manager CLI
  D. Hitachi?Resource Manager GUI
  Answer: B

  17. What indicates that the drive voltage is abnormal?
  A. CHK LED blinks once.
  B. CHK LED blinks twice.
  C. CHK LED blinks three times.
  D. CHK LED blinks five times.
  Answer: B

  18. You want to refer to the status of the components and manage the configuration of the Hitachi Thunder 9500V?Series subsystem. Which two software products can be used to meet this requirement? (Choose two.)
  A. Hitachi Resource Manager? +LWDFKL5HVRXUFH0DQDJHU
  B. HiCommand?Tuning Manager
  C. HiCommand?Device Manager
  D. Hitachi Dynamic Link Manager? +LWDFKL’QDPLF/LQN0DQDJHU
  Answer: AC

  19. You are connected to a Hitachi Thunder 9500V?Series subsystem using Hitachi?Resource Manager GUI. You have created LUNs for 12D+1P RAID group, and now you want to set up one spare disk. Given the following steps:
  A.select Settings-> Logical Settings
  B. select Settings-> Configuration Settings
  C. select the Logical Settings tab
  D.select Settings-> Logical Unit-> Set Spare Drive
  E.select the disk that you want to set up as spare
  F.select the Spare Drive tab
  A. B, F, E
  B. B, F, G
  C. D, C, E
  D. F, C, G
  Answer: B

  20. What is the vibration tolerance of a Hitachi Thunder 9570?subsystem in operation, if installed near large generators located on the floor above or below the subsystem?
  A. 2.5 m/s2 or less
  B. 3.0 m/s2 or less
  C. 3.5 m/s2 or less
  D. 4.0 m/s2 or less
  Answer: A

  免费下载hh0-200题库Demo

  Examsoon提供最新的Hitachi Data Systems认证 hh0-200题库，其全名为：(certified modular integration specialist exam). 在您决定是否购买之前 可以先下载hh0-200题库的部分演示. Examsoon是全球唯一提供所有IT认证考试题库demo免费下载的厂商 ，以下为免费hh0-200模拟测试题的下载链接

  免费的hh0-200题库PDF下载链接

  Hitachi hh0-200学习指南

  Hitachi Data Systems认证 hh0-200考试已经证明了它在全世界的广泛性和重要性，因此明白这项认证考试的世界各地的人必须具备与认证考试相关领域所需的技能和知识。Hitachi认证 hh0-200学习指南的目的是检查考生的能力和他对概念的意识。很多时候练习测试hh0-200考试都已经被修改过了，删掉了许多过时的东西，而那些需求是在考试课程。当应用到时候你所学的知识的时候，就会鉴定出你所学到的东西以及对所学知识的应用是多么的恰到好处。Hitachi认证 hh0-200是在IT行业的知名品牌，所以如果您通过了这样一个知名公司举行的一次考试，你可以想象你将来的事业会做的多么好。

  想要通过这个考试当然存在很多困难。你所要做的就是准备好充足的勇气和信心，而这些都来源与你平时训练的好坏.建议大家可以去Examsoon这个网站看一下，它的hh0-200考试是为了测试您在这方面的知识的掌握程度，最好的部分是它可以使你不断更新你所学的知识，不断进步。如果你知道所有的概念和如何使用他们的时候才是你真正掌握了Examsoon的用意。这门考试检查了您的能力和一旦你通过这次考验你将成为最优秀的人才，其他hh0-200考试的Examsoon结算值得注意的影响就是你的薪水将直线上升这大概也是每个人都希望获得的，所以要找一些好的资源才行。

  Examsoon考题大师hh0-200试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用Examsoon的考试题库参加hh0-200考试，保证您一次轻松通过考试；

  售后服务第一！我们相信要想在当今时代取得成功，必须为广大用户提供全套的周到细致的全程优质售后服务，只有客户满意了，才能发展。客户至上是Examsoon考题大师的一贯宗旨；
  
  

  No Comments

Leave a Reply

You must be logged in to post a comment.