最新的思科 微软 IBM Oracle HP 题库免费共享

640-816 Exam

Interconnecting Cisco Networking Devices Part 2

科目編號 : 640-816

科目名稱 : Interconnecting Cisco Networking Devices Part 2

時間：75分鐘（40-50題）

可用語言：英語，日語，漢語，西班牙語，俄語，韓語，法語，葡萄牙語

題型：Multiple-choice single answer、Multiple-choice multiple answer、Drag-and-drop、Fill-in-the-blank、Testlet、Simlet、Simulations

相關：CCNA

Examsoon考古題價格：$ 79.00 $ 28.50

640-816 考試是 Cisco 公司的 Interconnecting Cisco Networking Devices Part 2 認證考試官方代號，Interconnecting Cisco Networking Devices Part 2 認證作為全球IT領域專家 Cisco 熱門認證之一，是許多大中IT企業選擇人才標準的必備條件。

Examsoon帶來Cisco 640-816考試要點分享：

Configure, verify and troubleshoot a switch with VLANs and interswitch communications

Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)

Describe how VLANs create logically separate networks and the need for routing between them

Configure, verify, and troubleshoot VLANs

Configure, verify, and troubleshoot trunking on Cisco switches

Configure, verify, and troubleshoot interVLAN routing

Configure, verify, and troubleshoot VTP

Configure, verify, and troubleshoot RSTP operation

Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network

Implement basic switch security (including: port security, unassigned ports, trunk access, etc.)

Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network

Calculate and apply a VLSM IP addressing design to a network

Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment

Describe the technological requirements for running IPv6 (including: protocols, dual stack, tunneling, etc)

Describe IPv6 addresses

Identify and correct common problems associated with IP addressing and host configurations

Configure and troubleshoot basic operation and routing on Cisco devices

Compare and contrast methods of routing and routing protocols

Configure, verify and troubleshoot OSPF

Configure, verify and troubleshoot EIGRP

Verify configuration and connectivity using ping, traceroute, and telnet or SSH

Troubleshoot routing implementation issues

Verify router hardware and software operation using SHOW & DEBUG commands

Implement basic router security

Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.

Describe the purpose and types of access control lists

Configure and apply access control lists based on network filtering requirements

Configure and apply an access control list to limit telnet and SSH access to the router

Verify and monitor ACL’s in a network environment

Troubleshoot ACL implementation issues

Explain the basic operation of NAT

Configure Network Address Translation for given network requirements using CLI

Troubleshoot NAT implementation issues

Implement and verify WAN links

Configure and verify Frame Relay on Cisco routers

Troubleshoot WAN implementation issues

Describe VPN technology (including: importance, benefits, role, impact, components)

Configure and vary PPP connection between Cisco routers

Download 640-816 Exam Testing Engine

640-816 Exam
Interconnecting Cisco Networking Devices Part 2
科目编号：640-816
科目名称：Interconnecting Cisco Networking Devices Part 2
考题数目：233 Q&As
更新日期：2009-12-114

CCNA 认证是业界最广泛认可的IT技术认证之一，也是业界最权威、最受尊敬的认证之一。获得CCNA认证不仅仅能证明您的IT技术能力，更是您进入职场的敲门砖，也是提高您身价的另一捷径。

CCNA考题由Pass4Side的资深认证讲师和经验丰富的技术专家精心编辑，整理更新，包含了全套CCNA认证考试试题截屏题与正确答案，完整覆盖CCNA考试题库。

1. Refer to the exhibit. Two routers have just been configured by a new technician. All interfaces are up. However, the routers are not sharing their routing tables. What is the problem?
A. Split horizon is preventing Router2 from receiving routing information from Router1.
B. Router1 is configured for RIP version 2, and Router2 is configured for RIP version 1.
C. Router1 has an ACL that is blocking RIP version 2.
D. There is a physical connectivity problem between Router1 and Router2.
E. Router1 is using authentication and Router2 is not.
Answer: B

2. Refer to the exhibit. The router has been configured with these commands:
hostname Gateway
interface FastEthernet 0/0
ip address 198.133.219.14 255.255.255.248
no shutdown
interface FastEthernet 0/1
ip address 192.168.10.254 255.255.255.0
no shutdown
interface Serial 0/0
ip address 64.100.0.2 255.255.255.252
no shutdown
ip route 0.0.0.0 0.0.0.0 64.100.0.1
What are the two results of this configuration? (Choose two.)
A. The default route should have a next hop address of 64.100.0.3.
B. Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.
C. The address of the subnet segment with the WWW server will support seven more servers.
D. The addressing scheme allows users on the Internet to access the WWW server.
E. Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.
Answer: DE

3. Refer to the output from the show running-config command in the exhibit. What should the administrator do to allow the workstations connected to the FastEthernet 0/0 interface to obtain an IP address?
A. Apply access-group 14 to interface FastEthernet 0/0.
B. Add access-list 14 permit any any to the access list configuration.
C. Configure the IP address of the FastEtherent 0/0 interface to 10.90.201.1.
D. Add an interface description to the FastEthernet 0/0 interface configuration.
Answer: C

4. Refer to the exhibit. Which statement describes DLCI 17?
A. DLCI 17 describes the ISDN circuit between R2 and R3.
B. DLCI 17 describes a PVC on R2. It cannot be used on R3 or R1.
C. DLCI 17 is the Layer 2 address used by R2 to describe a PVC to R3.
D. DLCI 17 describes the dial-up circuit from R2 and R3 to the service provider.
Answer: C

5. Refer to the exhibit. What can be concluded from the output of the debug command?
A. The output represents normal OSPF operation.
B. The interfaces of two OSPF routers connected to the Border router are in the same subnet.
C. The OSPF router connected to interface Serial0/1 has NOT formed a neighbor relationship with the Border router.
D. A router is connected to interface Serial0/3 of the Border router. The OSPF router ID of the connected router is the IP address of the connected interface.
Answer: C

6. Refer to the exhibit.
A junior network engineer has prepared the exhibited configuration file. What two statements are true of the planned configuration for interface fa0/1? (Choose two.)
A. The two FastEthernet interfaces will require NAT configured on two outside serial interfaces.
B. Address translation on fa0/1 is not required for DMZ Devices to access the Internet.
C. The fa0/1 IP address overlaps with the space used by s0/0.
D. The fa0/1 IP address is invalid for the IP subnet on which it resides.
E. Internet hosts may not initiate connections to DMZ Devices through the configuration that is shown.
Answer: BE

7. What is the default Local Management Interface frame type transmitted by a Cisco router on a Frame Relay circuit?
A. Q933a
B. B8ZS
C. IETF
D. Cisco
E. ANSI
Answer: D

8. Refer to the exhibit. The network shown in the exhibit has just been installed. Host B can access the Internet, but it is unable to ping host C. What is the problem with this configuration?
A. Host B should be in VLAN 13.
B. The address of host C is incorrect.
C. The gateway for host B is in a different subnet than the host is on.
D. The switch port that sends VLAN 13 frames from the switch to the router is shut down.
E. The switch port connected to the router is incorrectly configured as an access port.
Answer: B